2x Infinity KAPPA 63XF 6.5" Car Speakers, 2x 6.5" Component Speakers, Wire
These Infinity Kappa Series 6.5" speakers are designed to bring a new standard of excellence in car audio to virtually any vehicle. Kappa’s Plus One fiberglass woofers deliver high-output, deep and robust bass. Infinity’s glassfiber woofer cones are lighter and stiffer with more cone-area than the competition, delivering increased low-frequency output and higher efficiency. Hearing is believing. The high-resolution 3/4" edge-driven textile dome tweeters deliver soaring highs up to 40kHz.
General Features:
- 6-1/2" (165mm) Two-way Car Speaker
- Power Handling: 85Wrms, 255W peak
- Sensitivity (@ 2.83V): 93dB
- Frequency Response: 45Hz – 40kHz
- Impedance: 3.0 ohms
- Gross weight: 2.56kg
- 40kHz High-Resolution Silk Dome Tweeter
- Patented Plus One Glass Fiber Woofer
- UniPivot and Angled Tweeter
- Sleek and Powerful Design
In The Box:
- 2x Speakers
- 2x Plastic multi-hole adapter rings
- 2x Foam gaskets
- 8x Screws
- 8x Screws
- 8x Speed clips
- 2x Infinity logo badges
- 2x Brand stickers
- Owner’s manual
DO NOT USE DRILLS ON THE SCREW SPEAKER TERMINALS EVER.
Loosen and Tighten BY HAND ONLY. Using a Drill snaps the solder connection on the back of the terminal and the X-over (coax) Circuit board.
UPC Code 050667376956
These Infinity Kappa Series component speakers are designed to bring a new standard of excellence in car audio to virtually any vehicle. Kappa’s Plus One fiberglass woofers deliver high-output, deep and robust bass. The high-resolution 3/4" edge-driven textile dome tweeters deliver soaring highs up to 40kHz. Midranges are available to upgrade two-way component systems into three-way.
General Features:
- Power Handling: 110Wrms, 330W peak
- Sensitivity (@ 2.83V): 93dB
- Frequency Response: 45Hz – 40kHz
- Impedance: 3.0 ohms
- Gross weight: 2.9kg
- 40kHz High-resolution Silk Dome Tweeter
- Patented Plus One Glass Fiber Woofers
- 0dB or -3dB Tweeter Output Level Control
- 3-way Upgradability
- Super Compact Design and High Sensitivity 3" Midrange Speaker
- Sleek and Powerful Industry Design
- Slim and Smart Crossover Design
In The Box:
- 2x Speakers
- 2x Plastic multi-hole adapter rings
- 2x Foam gaskets
- 2x Crossovers
- 2x Tweeters
- 2x Threaded flush-mount adapters
- 2x Plastics locking nuts
- 2x Surface-mount cups
- 2x Starfish tweeter mounts
- 30x Screws
- 16x Speed clips
- 1x Allen head bit (2.5mm)
- 2x Infinity logo badges
- 2x Brand stickers
- Owner’s manual
DO NOT USE DRILLS ON THE SCREW SPEAKER TERMINALS EVER.
Loosen and Tighten BY HAND ONLY. Using a Drill snaps the solder connection on the back of the terminal and the X-over (coax) Circuit board.
UPC Code 050667376949
EnrockAudio 16-Gauge Speaker Wire
This 16-gauge speaker wire with spool from EnrockBasics lets you easily connect your speakers to amplifiers or receivers.
Marked Polarity
One side of the wire is marked with a white line, making it quick and easy to distinguish the polarity and get your audio system set up properly
Easy to Use
The EnrockAudio 16-gauge Speaker Wire comes wrapped around a hard plastic spool that makes dispensing convenient and easy.
Details
Connects audio speakers to your A/V receiver or amplifier
No Distortion
The plastic jacket around the speaker wire helps to deliver high-quality undistorted signals to and from all of your audio equipment.
General Specifications:
- Connects audio speakers to your Audio Video (A/V) receiver or amplifier.
- Features a plastic jacket around the speaker wire helps to deliver high-quality undistorted signals.
- The white line on one side of the wire makes it quick and easy to distinguish the polarity to get your audio system set up properly.
- Comes wrapped around a hard plastic spool that makes dispensing convenient and easy.
- Length: 50 Feet.
- Gauge: 16.
UPC Code 799861390381