2x Infinity KAPPA 63XF 6.5" Car Speakers, 2x 4x6" Speaker, 2x 6x9” Speaker, Wire
These Infinity Kappa Series 6.5" speakers are designed to bring a new standard of excellence in car audio to virtually any vehicle. Kappa’s Plus One fiberglass woofers deliver high-output, deep and robust bass. Infinity’s glassfiber woofer cones are lighter and stiffer with more cone-area than the competition, delivering increased low-frequency output and higher efficiency. Hearing is believing. The high-resolution 3/4" edge-driven textile dome tweeters deliver soaring highs up to 40kHz.
General Features:
- 6-1/2" (165mm) Two-way Car Speaker
- Power Handling: 85Wrms, 255W peak
- Sensitivity (@ 2.83V): 93dB
- Frequency Response: 45Hz – 40kHz
- Impedance: 3.0 ohms
- Gross weight: 2.56kg
- 40kHz High-Resolution Silk Dome Tweeter
- Patented Plus One Glass Fiber Woofer
- UniPivot and Angled Tweeter
- Sleek and Powerful Design
In The Box:
- 2x Speakers
- 2x Plastic multi-hole adapter rings
- 2x Foam gaskets
- 8x Screws
- 8x Screws
- 8x Speed clips
- 2x Infinity logo badges
- 2x Brand stickers
- Owner’s manual
DO NOT USE DRILLS ON THE SCREW SPEAKER TERMINALS EVER.
Loosen and Tighten BY HAND ONLY. Using a Drill snaps the solder connection on the back of the terminal and the X-over (coax) Circuit board.
UPC Code 050667376956
These Infinity Kappa speakers set a new standard in car audio. The Patented Plus One woofers deliver tight robust bass and high-output that is detailed and musical. Edge-driven textile dome tweeters with oversized voice coils deliver silky smooth highs with increased thermal power handling for high volume enthusiasts. Every model is voiced using audiophile grade inductors and capacitors resulting in detail and accuracy unmatched by other brands in their class. And Kappa's 2 ohm design extracts every watt of power from the amplifier or head unit for exceptional performance. Kappa is how all car speakers should perform.
General Features:
- 4" x 6" two-way car audio plate multi-element speakers
- Power Handling: 60W RMS, 180W peak
- Sensitivity (@ 2.83V): 94dB
- Frequency Response: 75Hz – 25kHz
- Voice Coil Diameter: 1 in. (25mm)
- Impedance: 2.5 ohms
- Patented Plus One Glass Fiber Woofers
- Edge-driven textile dome tweeters
- SLI(Super Low Impedance) High Output design
- Harman Standard Reliability Testing
- Completely Tuned
DO NOT USE DRILLS ON THE SCREW SPEAKER TERMINALS EVER.
Loosen and Tighten BY HAND ONLY. Using a Drill snaps the solder connection on the back of the terminal and the X-over (coax) Circuit board.
UPC Code 050667373207
These Infinity Kappa speakers are the perfect speakers for audiophiles. With 360 watts of peak power and 120 watts of RMS power, these speakers feature an impressive sonic output. The enlarged cone design provides more bass to complement the superior high-frequency response. The speakers' durable construction will give you reliable service through prolonged use.
General Features:
- 6"x9" 3-Way Car Speakers
- Plus One+ Glass-Fiber Woofer Cone
- Hi-Roll Rubber Surround
- Edge-Driven Silk Dome Tweeter and Supertweeter
- Grilles Included
- 3-Ohm Impedance
- 120 Watts RMS, 360 Watts Peak Power
- Frequency Response: 35-40,000 Hz
- Sensitivity: 94 dB at 2.83 volts
DO NOT USE DRILLS ON THE SCREW SPEAKER TERMINALS EVER.
Loosen and Tighten BY HAND ONLY. Using a Drill snaps the solder connection on the back of the terminal and the X-over (coax) Circuit board.
UPC Code 050667376994
EnrockAudio 16-Gauge Speaker Wire
This 16-gauge speaker wire with spool from EnrockBasics lets you easily connect your speakers to amplifiers or receivers.
Marked Polarity
One side of the wire is marked with a white line, making it quick and easy to distinguish the polarity and get your audio system set up properly
Easy to Use
The EnrockAudio 16-gauge Speaker Wire comes wrapped around a hard plastic spool that makes dispensing convenient and easy.
Details
Connects audio speakers to your A/V receiver or amplifier
No Distortion
The plastic jacket around the speaker wire helps to deliver high-quality undistorted signals to and from all of your audio equipment.
General Specifications:
- Connects audio speakers to your Audio Video (A/V) receiver or amplifier.
- Features a plastic jacket around the speaker wire helps to deliver high-quality undistorted signals.
- The white line on one side of the wire makes it quick and easy to distinguish the polarity to get your audio system set up properly.
- Comes wrapped around a hard plastic spool that makes dispensing convenient and easy.
- Length: 50 Feet.
- Gauge: 16.
UPC Code 799861390381
