JBL A1000 1000W Subwoofer Amplifier Bundle with 2x 12" Subwoofers & Wiring Kit
The JBL Club A1000 mono subwoofer amplifier delivers 1000-Watts RMS using a Class D amplifier design to ensure high output and minimum current draw. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your car's factory radio. You can use the low-pass filter and variable bass boost to maximize the performance of your subwoofer and enclosure, while a phase switch ensures that the bass will blend well with your full-range speakers.
General Features:
- 600 watts RMS x 1 at 4 ohms (1000 watts RMS x 1 at 2 ohms)
- Class D amp technology
- frequency response: 10-320 Hz
- variable low-pass filter (32-320 Hz, 12 dB/octave)
- variable bass boost (0-12dB at 45Hz)
- phase switch (0, 180 degrees)
- wired remote level control included
- preamp inputs and outputs
- speaker-level inputs (speaker wire-to-RCA adapters included)
- 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
- fuse rating: 35A x 3
- WxHxD=12-5/8” x 2-1/16" x7-1/8”
UPC Code 050036369183
This JBL Club subwoofer offers incredible installation flexibility. Its low-profile design allows it to fit perfectly into even the most shallow of enclosures – great for today’s compact cars. The polypropylene woofer cone delivers exceptional bass response at frequencies as low as 27Hz. But what makes this sub really stand out is the Harman-proprietary SSI (Selectable Smart Impedance), which allows the subwoofer to present the amplifier with either a 2 or 4 ohm load at the flip of a switch.
General Features:
- Low-profile design
- Harman-proprietary SSI (Selectable Smart Impedance)
- Frequency response as low as 27Hz
- OEM-level reliability testing
- Type: 12" Shallow mount subwoofer
- Peak power handling: 1000W
- Power handling, continuous average: 250W
- Nominal impedance: 2 ohm or 4 ohm, switch selectable
- Sensitivity (2.83V/m): 92dB
- Mounting depth: 3-5/16 (83mm)
- Frequency Response: 27 – 175 Hz
UPC Code 050036331609
The Enrock 8-Gauge Amplifier Installation Kit makes installing your brand new sound system in your car or truck much easier. It includes all of the cables, wires, tubing, ties, grommets and ring terminals that you will need in order to get your new sound system up and running.
The car amp install kit works with a wide range of sound systems and car types and it makes the installation process much simpler by conveniently adding all your supplies to one single kit.
Kit Includes:
- 20 ft. 8 GA Red Power Cable.
- Competition High Quality Fuse Holder.
- 1/4" Ring Terminal.
- 3 ft. 8 GA Black Ground Cable #10 Ring Terminal.
- 16 ft. 18 GA Blue Turn-On Wire.
- 20 ft. High Performance RCA (TRCA) Interconnect (3) Rubber Grommets.
- 30 ft. Speaker Wire 5/16" Ring Terminal.
- 6 ft. Split Loom Tubing (20) 4" Wire Ties.
UPC Code 728120451105
