Kicker Marine KMC20 USB Receiver With 4x 6.5" Boat Speakers and Black Enclosures
Meet the control center for fun on your boat! Equipped with an easily readable screen, rotary encoder and over 200 watts of total peak power into four channels, the KMC2 comes equipped with plenty of power. Add even more bump to your boat by adding amplifiers to the included RCA outputs. Connect your Bluetooth to the KMC2, plug into the included USB or RCA inputs, or turn on the AM/FM radio. Add a wired KRC12 remote for even more control. This durable media center is ready for some fun on the water!
General Features:
- AM/FM/Bluetooth Streaming Up to 30 Feet
- USB Charging and Thumb-Drive Playback
- Four Channel Speaker Output and Full-Range RCA Output
- Customizable EQ
- Fits in Gauge Opening
- Uses USB, RCA, AM/FM, Bluetooth Audio Sources
- USB playback and Charging
- Rotary Encoder
- AUX Input Sensitivity
- Power Output: 25W x 4
- Frequency Response: 20-20kHz
- Signal to Noise Ratio: 87dB
- IP Rating: IPX66
- Works with KRC12 Remote (Sold Separately)
UPC Code 713034013136
This KM 6.5-Inch Speaker works best with 50 watts of recommended power. ASTM-tested for UV and salt/fog exposure, all KICKER Marine Speakers are designed specifically for boat audio and meets or exceeds the strictest standards in the industry. UV treatments on the coaxials' injection-molded cones, Santoprene surrounds, baskets and grilles help all models maintain in marine environments. These speakers can endure almost any weather conditions with splash-and-spray-resisting sealed motors, cones and locking terminal covers. Speaker hardware is forged from rustproof, 316L stainless-steel. Spectacular highs and midrange sounds coupled with the simplest of speaker installations, provide full-range audio specifically for a marine environment.
General Features:
- Spectacular Highs And Smooth, Impactful Midrange
- Made Specifically For Marine With Sealed Motor And Polymer Basket
- UV-Treated Polypropylene Woofer With Santoprene Surround
- Stainless Steel Hardware Included
- White Grill And Basket Will Not Yellow Or Fade
- ASTM Tested For UV And Salt/Fog Exposure
- Woofer(in,mm): 6-1/2, 165
- Tweeter(in,mm): 1/2, 13
- Tweeter Dome Material: PEI
- Rated Impedance(Ω): 4
- Peak Power (watts, per ANSI/CTA-2031-A): 150
- Recommended Amplifier Power (watts RMS): 15-50
- Sensitivity(1W,1m): 90
- Frequency Response(Hz): 35-21k
- Mounting Hole Diameter(in,mm): 5-3/16, 132
- Mounting Depth(in,mm): 2-1/2, 62
- Grilles: White Only
UPC Code 713034028000
Check out Kickers newly designed 12KMTES unloaded power speaker enclosures. Water can be rough on speakers, particularly tower speakers. These rugged weatherproof enclosures will safeguard your Kicker 6.5” marine speakers (not included) from spray, mist, dust, salt and damage even with our extreme outdoor environment.
Great music is key to making life outdoors all the more enjoyable. Wherever you mount them the enclosures will rotate nine degrees in either direction so you can point your speakers for preferred coverage. Slotted mounting holes house different speaker bolt patterns, while stainless-steel speaker terminals ensure easy wiring. The enclosures also include 2 5/8” aluminum tower pipe clamps and mounting adapters for the popular pipe diameters.
Manufactured precisely for marine and powersport use, these bold black enclosures are intended for your on the go outdoor life. With tough ABS plastic shells and an acoustic polyfill lining, your get lasting strength and exceptional performance.
General Features:
- Fits 6.5" (165mm) Midrange/Woofer Speakers, Drivers.
- Each enclosure holds one 6.5" Speaker
- For marine and powersport applications.
- Tough ABS.
- weather-proof empty enclosures with slotted mounting holes for different bolt patterns.
- Nine-degree axis rotation in either direction for aiming maximum sound quality.
- Fits Mounting Tube Sizes : 2-1/4, 2-3/8, 2-1/2, 2-5/8
- Satin nickel plated brass binding posts.
- Includes Mounting hardware and polyfill.
- Weather-proof And Durable ABS Material.
- For marine and powersport applications.
- 9-degree axis rotation for directional sound.
- Satin nickel plated brass binding post connectors (screw to tighten style)
- Slotted mounting holes for different bolt patterns.
- 9-degree axis rotation for directional sound.
- Color: Black
Includes:
- Mounting Hardware
- Polyfill
- Screws
- Aluminum tower-pipe clamps (2-5/8-inch)
- 3 Mounting Adapter Sizes: 2-1/4, 2-3/8, 2-1/2, 2-5/8
- Billet-aluminum brackets and clamp inserts adjust to seven common sizes for easy install
UPC Code 713034059172
