4 x Kicker 6.5" Marine Boat Speakers, Jensen Bluetooth USB Stereo Receiver, Amp
JVC KD-X38MBS marine digital media receiver is outdoor-ready, thanks to a conformal-coated circuit board that resists moisture damage. It's white-background display cuts through glare and makes this receiver ideal for out door and open-top vehicles. Also features built-in Bluetooth, an option for satellite radio, and plenty of connections for your digital devices, you'll have lots of music options on the road, trail, or water.
General Features:
- AUX/USB Inputs
- MOSFET (22 watts RMS/50 peak x 4 channels)
- Backlit Display
- Conformal Coated PCB
- 13-Band EQ
- 2-Zone Variable-Color Illumination
- JVC Remote App Compatibility
- 4.0V High-Voltage 3 Pre-Outs
- Space Enhancement
- Sound Response
- Sound Lift
- Audio Streaming Control
- iPhone Bluetooth Automatic Pairing
- 2-Line VA LCD Display
- High Current 1.5A Charging
- Satellite Radio Ready
- Wired Remote Control (Optional)
- Steering Wheel Remote Control Ready
- AM/FM Tuner
- 18FM, 6AM Preset Stations
- MP3/WMA/WAV/AAC/FLAC Playback
- Bluetooth Built-In
UPC Code 046838002410
This KM 6.5-Inch Speaker works best with 50 watts of recommended power. ASTM-tested for UV and salt/fog exposure, all KICKER Marine Speakers are designed specifically for boat audio and meets or exceeds the strictest standards in the industry. UV treatments on the coaxials' injection-molded cones, Santoprene surrounds, baskets and grilles help all models maintain in marine environments. These speakers can endure almost any weather conditions with splash-and-spray-resisting sealed motors, cones and locking terminal covers. Speaker hardware is forged from rustproof, 316L stainless-steel. Spectacular highs and midrange sounds coupled with the simplest of speaker installations, provide full-range audio specifically for a marine environment.
General Features:
- Spectacular Highs And Smooth, Impactful Midrange
- Made Specifically For Marine With Sealed Motor And Polymer Basket
- UV-Treated Polypropylene Woofer With Santoprene Surround
- Stainless Steel Hardware Included
- White Grill And Basket Will Not Yellow Or Fade
- ASTM Tested For UV And Salt/Fog Exposure
- Woofer(in,mm): 6-1/2, 165
- Tweeter(in,mm): 1/2, 13
- Tweeter Dome Material: PEI
- Rated Impedance(Ω): 4
- Peak Power (watts, per ANSI/CTA-2031-A): 150
- Recommended Amplifier Power (watts RMS): 15-50
- Sensitivity(1W,1m): 90
- Frequency Response(Hz): 35-21k
- Mounting Hole Diameter(in,mm): 5-3/16, 132
- Mounting Depth(in,mm): 2-1/2, 62
- Grilles: White Only
UPC Code 713034028000
Using a Class-D power plant, this amp features a variable bass boost with KickEQ™, giving you as much as 6dB of extra bump. Powering as many as eight speakers, this amplifier makes your entire boat sound like a floating concert! A powerful 12dB crossover is also included, letting you quickly tune your system to perfection. This KM-Series amplifier delivers 90 watts into four channels, or 180 watts bridged into two channels.
General Features:
- Class D Power Supply
- 500 Watts of Dynamic Power
- Four-Channel Amplifier with Bridging Capability
- Conformal-Coated Circuit Board
- Variable 12dB Crossover
- KickEQ Variable 6dB Bass Boost
- Real Marine ABYC/NMMA-Compliant Power Connections
- 316L Stainless-Steel Hardware Included
- POWER [watts/ch], 2 OHM STEREO: 90 x 4
- POWER [watts/ch], 4 OHM BRIDGED MONO: 180 x 2
- DYNAMIC POWER [watts]: 500
- DIMS [in] all models 2-5/16H x 7-1/8W x ___L: 12-7/16
- DIMS [cm] all models 5.9H x 18.0W x ___L: 31.5
- FREQUENCY RESPONSE [Hz]: 10-20k, +0/-1dB
- High Level Sensitivity: 250mV-10V
- Low Level Sensitivity: 125mV-5V
- SIGNAL-TO-NOISE RATIO: >95dB, a-weighted, re: rated power
- ACTIVE CROSSOVER: 12dB/octave, variable 50-200Hz, selectable high pass, low pass or all pass
- KickEQ BOOST Variable 0-6dB, centered @ 40Hz
UPC Code 713034020370
