Marine Radio Receiver With Amplifier, Sets of 4" + 6.5" Coaxial And Box Speakers
This marine/motorsports single-DIN digital media receiver comes packed with an array of features sure to boost your vehicle's infotainment system to the next level. This receiver features built-in Bluetooth and USB/AUX inputs to connect to your preferred smart devices, satellite radio readiness, and AM/FM radio. Use the remote control app to gain intuitive control over the receiver's features through your phone! The bright display offers visual customization through a variable color illumination. The conformal coating improves the durability of the circuit boards, making it reliable in open-environment applications!
General Features:
- 255 Segment 1.5 Line Text Display
- Bluetooth Direct Access Button
- Bluetooth Built-In
- Variable Color Illumination
- 13-Band EQ & DTA
- Conformal Coating
- Optional Wired Remote Control Ready
- Front USB & AUX IN
- 3 Preouts 4.0V
- AM/FM Radio Tuner
- Dual Phone Connection
- Sattelite Radio Ready
- Drive EQ
- Short Chassis
- Remote App
- Music Mix
UPC Code 019048234032
This KM 6.5-Inch Speaker works best with 50 watts of recommended power. ASTM-tested for UV and salt/fog exposure, all KICKER Marine Speakers are designed specifically for boat audio and meets or exceeds the strictest standards in the industry. UV treatments on the coaxials' injection-molded cones, Santoprene surrounds, baskets and grilles help all models maintain in marine environments. These speakers can endure almost any weather conditions with splash-and-spray-resisting sealed motors, cones and locking terminal covers. Speaker hardware is forged from rustproof, 316L stainless-steel. Spectacular highs and midrange sounds coupled with the simplest of speaker installations, provide full-range audio specifically for a marine environment.
General Features:
- Spectacular Highs And Smooth, Impactful Midrange
- Made Specifically For Marine With Sealed Motor And Polymer Basket
- UV-Treated Polypropylene Woofer With Santoprene Surround
- Stainless Steel Hardware Included
- White Grill And Basket Will Not Yellow Or Fade
- ASTM Tested For UV And Salt/Fog Exposure
- Woofer(in,mm): 6-1/2, 165
- Tweeter(in,mm): 1/2, 13
- Tweeter Dome Material: PEI
- Rated Impedance(Ω): 4
- Peak Power (watts, per ANSI/CTA-2031-A): 150
- Recommended Amplifier Power (watts RMS): 15-50
- Sensitivity(1W,1m): 90
- Frequency Response(Hz): 35-21k
- Mounting Hole Diameter(in,mm): 5-3/16, 132
- Mounting Depth(in,mm): 2-1/2, 62
- Grilles: White Only
UPC Code 713034028000
Everything you love about Polk's Dynamic Balance technology -that rich, clean, full-range sound-is built into the marine-tough, yet ruggedly sophisticated, DB+ series. And with its universal fit, it can be installed in any vehicle: Automobiles, motorcycles, boats, ATVs-you name it. High Performance Factory Upgrade Upgrade from your OEM speaker system toward a bigger, fuller, high-performance sound. The high-grade materials used in our DB+ Series ensure you get an audio system that's designed and engineered for clear, full range sound that will last much longer than your factory setup. These speakers also feature non-resonant materials so you get extremely clear highs, mids and lows no matter what you're listening to through our patented Dynamic Balance (DB) Technology. Universal Fit The new DB+ series has been updated so you can enjoy a simple drop in installation in any vehicle including cars, boats, ATV's -- you name it. Its new shallow tweeter design ensures your factory speaker grille re-installs with ease for a flush, seamless look. This quick and easy experience also ensures a faster installation process so you can get back to what matters with our great sound always along for the ride. Marine Certified The DB+ Series is IP65 rated so it's dirt- & water- resistant. It also has been tested for salt-fog, UV and humidity. A big part of that marine certification also means that each speaker has a non-corrosive plastic grille, a polypropylene UV tolerant cone, waterproof inner and outer surrounds, and stainless steel mounting hardware, ensuring that it's fully protected against the elements.\n
2-way car speakers
4" polypropylene woofer cone with rubber surround
3/4" silk dome tweeter
handles up to 45 watts RMS (135 watts peak power)
frequency range: 60-22,000 Hz
sensitivity: 90 dB
top-mount depth: 1-13/16"
grilles included
UPC Code 747192127244
Rock that legendary KICKER sound inside, outside or out and about! Play the KB6 on your backyard deck, under the eaves, inside the shop, or near the pool for great sound, rain or shine. You can even go mobile! Use the universal bracket to mount the KB6 on your boat, off-road vehicle or RV.
The KB6 is a full-range, high-efficiency speaker system truly suitable for indoor and outdoor use. Providing an 8-Ohm load and ready to be driven by your home stereo receiver or a car-audio amplifier, you can easily run a single pair or more with minimal effort (min. 18 AWG speaker wire required for easy-pinch terminals). The included bracketing makes it easy to install vertically or horizontally - on nearly any flat surface.
Designed as a dual-enclosure weatherproof system, the KB6 features bold 6-1/2 -inch KICKER woofers and 2 x 5-inch, compression-loaded horn tweeters. The woofers utilize precisely tuned polypropylene cones and rugged Santoprene® surrounds. The system acoustically blends powerful bass and thrilling highs for an all-weather KICKER sound you’ll love to listen to all day long.
General Features:
- Compression Loaded Horn Tweeters
- Polypropylene Woofer Cones
- Santoprene Surrounds
- Full-Range Sound Reproduction
- Type: 2-Way
- Components per Enclosure: 6.5" Woofer, 2x5" Horn
- Peak Rec Amp Power: 150W
- RMS Rec Amp Power: 75W
- Frequency Response: 55-21kHz
- Impedance: 8-Ohms
- Sensitivity: 90dB 1w/1m
- Grilles: Yes
- Standard Dimensions (in.): 11W x 8-1/8H x 8-1/8D
- Metric Dimensions (cm.): 27.9W x 20.7H x 20.7D
UPC Code 713034004028
Using a Class-D power plant, this amp features a variable bass boost with KickEQ™, giving you as much as 6dB of extra bump. Powering as many as eight speakers, this amplifier makes your entire boat sound like a floating concert! A powerful 12dB crossover is also included, letting you quickly tune your system to perfection. This KM-Series amplifier delivers 90 watts into four channels, or 180 watts bridged into two channels.
General Features:
- Class D Power Supply
- 500 Watts of Dynamic Power
- Four-Channel Amplifier with Bridging Capability
- Conformal-Coated Circuit Board
- Variable 12dB Crossover
- KickEQ Variable 6dB Bass Boost
- Real Marine ABYC/NMMA-Compliant Power Connections
- 316L Stainless-Steel Hardware Included
- POWER [watts/ch], 2 OHM STEREO: 90 x 4
- POWER [watts/ch], 4 OHM BRIDGED MONO: 180 x 2
- DYNAMIC POWER [watts]: 500
- DIMS [in] all models 2-5/16H x 7-1/8W x ___L: 12-7/16
- DIMS [cm] all models 5.9H x 18.0W x ___L: 31.5
- FREQUENCY RESPONSE [Hz]: 10-20k, +0/-1dB
- High Level Sensitivity: 250mV-10V
- Low Level Sensitivity: 125mV-5V
- SIGNAL-TO-NOISE RATIO: >95dB, a-weighted, re: rated power
- ACTIVE CROSSOVER: 12dB/octave, variable 50-200Hz, selectable high pass, low pass or all pass
- KickEQ BOOST Variable 0-6dB, centered @ 40Hz
UPC Code 713034020370
