Kenwood Marine BT CD Receiver, Cover, Amp w/Kit, 4x 6.5'' Speaker, Wire, Antenna
JVC KD-X38MBS marine digital media receiver is outdoor-ready, thanks to a conformal-coated circuit board that resists moisture damage. It's white-background display cuts through glare and makes this receiver ideal for out door and open-top vehicles. Also features built-in Bluetooth, an option for satellite radio, and plenty of connections for your digital devices, you'll have lots of music options on the road, trail, or water.
General Features:
- AUX/USB Inputs
- MOSFET (22 watts RMS/50 peak x 4 channels)
- Backlit Display
- Conformal Coated PCB
- 13-Band EQ
- 2-Zone Variable-Color Illumination
- JVC Remote App Compatibility
- 4.0V High-Voltage 3 Pre-Outs
- Space Enhancement
- Sound Response
- Sound Lift
- Audio Streaming Control
- iPhone Bluetooth Automatic Pairing
- 2-Line VA LCD Display
- High Current 1.5A Charging
- Satellite Radio Ready
- Wired Remote Control (Optional)
- Steering Wheel Remote Control Ready
- AM/FM Tuner
- 18FM, 6AM Preset Stations
- MP3/WMA/WAV/AAC/FLAC Playback
- Bluetooth Built-In
UPC Code 046838002410
Pyle's Hydra series speakers are water resistant and designed for use in your boat, on the dock, by the pool, or simply mounted outside. They're designed with rust-proof mesh covers for quality protection. The PLMR62 is a 200-watt, 6.5' two-way, full-range speaker suitable for marine use. These white speakers are equipped with a ½' neodymium dome tweeter for rich highs and a 1' aluminum voice coil for accurate sound reproduction. The molded ABS plastic basket keeps your sound distortion-free.
General Features:
- 6.5'' High Quality Poly Carbon Cone
- 2-Way Water Resistant Construction Design
- 1'' High Temperature Voice Coil
- 1/2'' Neodymium Dome Tweeter
- 200 Watts Rated Peak Power
- Frequency Response: 85Hz-20K Hz
- 4 Ohm Impedance
- Sensitivity: 90dB
- Mounting Depth: 2.5''
- Cut-out Size: F135 mm
UPC Code 068888723138
This 4-channel waterproof MP3/iPod marine amplifier is a powerful addition to your marine audio setup. It pushes 200 watts maximum on each of the two channels for a bone-rattling power that's basically unmatched. It takes RCA line inputs and includes a 3.5mm-to-RCA adaptor so you can plug in your MP3 player or iPod easily. Also takes standard high and low level inputs from a marine head-unit. Comes with a wired remote control for volume gain. For safety, this amp is equipped with power protection circuitry and soft turn on/off prevents damage to your speaker equipment.
General Features:
- 4 x 100 Watts RMS at 4 Ohms
- 4 x 200 Watts Max at 4 Ohms
- 4 x 300 Watts RMS at 2 Ohms
- Fuse: 10A
- RCA Line Input
- T.H.D: <0.05%
- Soft Turn On/Off
- S/N Ratio: >95dB
- Anti-Thump Turn-On
- 2 Ohms Stereo Stable
- Power Protection Circuitry
- Channel Separation: >65dB
- Volume Gain Remote Control
- Remote Control for Volume Gain
- Converter: High Low Level Inputs
- Frequency Response: 10Hz - 40kHz
- Dimensions: 6.10'' L x 3.35'' W x 1.38'' H
UPC Code 068888897976
The antenna includes a flexible mast for durability, along with a 180 swivel base for increased mounting options. It is corrosion resistant and includes 45 inch cable. Flexible mast. Angled mounting options allow you to install the 20W antenna in the most convenient locations. Corrosion resistant for the marine environment.
General Features:
- Flexible Mast AM/FM Marine Antenna
- 180 degrees Swivel base for maximum mobility and 45 inch cable
- Angled mounting options allow installation of the antenna in the most convenient locations
UPC Code 799861390336
This smoke-colored water resistant radio shield with white base color protects your head unit from the elements. Smoke colored housing window decreases UV exposure to your stereo to prevent damage like cracking. The spring loaded flip-up door is easy to access. Support shelf in rear of housing holds the radio. Mounting gasket included.
UPC Code 068888883252
Get all the wires you need to hook up a new marine audio system with this Pyle Hydra amplifier installation kit. These wires have high resistance to moisture, so they’re a great fit on your boat or in outdoor settings. Included wires: 20 ft. 8-gauge red power wire, 4 ft. 8 gauge black ground wire, 20 ft. 18-gauge blue remote turn-on, 20 f. 12 gauge stereo speaker wire, 20 ft. stereo RCA cable, and 6 ft. black split loom cable conduit. Also includes an AGU type 60A gold-plated fuse, water resistant in-line fuse holder, two 8G ring terminals, two 8G spade terminals, five 14-16G spade terminals, 3 butt connectors, 20 cable ties, and one black grommet.
Amp Kit:
- Marine Grade Cables and Wires
- Perfect for Installations in Boats and Outdoor
- High Resistance to Moisture
- 20ft. 8 Gauge Red Power Wire
- 4ft. 8 Gauge Black ground Wire
- 20ft. 18 Gauge Blue Remote Turn-On
- 20ft. 12 Gauge StereoSpeaker Wire
- 20ft. Right Angle/Standard Stereo RCA Audio Cable
- 6ft. Black Split Loom Cable Conduit
- AGU Type 60A Gold Plated Fuse
- Water Resistant In-line Fuse Holder
- 2 Ring Terminals: 8G
- 2 Spade Terminals: 8G
- 5 Spade Terminals: 14-16G
- 3 Butt Connectors 20 Cable Ties
- 1 Black Grommet
- Sold as: 0
- Weight: 2.1 lbs.
UPC Code 068888882415
Enrock's 16-Gauge Speaker Wire is a smart solution to your audio installation. This wire comes in 50 feet to give you convenient installation and pure sound quality enhancement. The cable is tinned and oxygen free copper (OFC) to deliver high-quality sound without any transmission loss. Marine grade speaker wiring made simple. Just use high quality marine duplex wiring with it's fine stranded tin plated copper to resist corrosion.
General Features:
- Connects audio speakers to your Audio Video (A/V) receiver or amplifier.
- Marine grade tinned wire
- Oxygen Free Copper (OFC)
- Length: 50 Feet
- Gauge: 16
UPC Code 728120479901

