2x Kicker 43DSC6504 6.5" 240 Watt Max 2-Way 4-Ohm Speakers, 4-Channel 350W Amplifier w/Front Wiring Harness + Install Kit, Antenna Booster, Speaker Wire (Bundle Fits 2014+ Harley Davidson FLH/FLT)

---

Installing aftermarket amplifiers in the front fairings of your Harley-Davidson motorcycle? This single or dual-amp installation kit will make wiring your connections so much easier! Constructed with oxygen-free copper for the best possible conductivity and audio performance.

Features:

• Single or dual-amp installation harness
• Designed for installing aftermarket amplifiers in front fairings
• Oxygen-free copper wiring for better conductivity and performance
• Quick-disconnect for each amplifier
• 3-year limited warranty

• 8 gauge 5.5' power and ground wires
• Over-mold split to (2) 10 gauge power and ground wires
• 60 amp mini ANL fuse and holder

• Ignition T-harness included for amp turn-on

UPC Code 086429416110

---

The Kicker KPX300.4 Four-Channel Amplifier is built to power every speaker in your ride. Engineered specifically for motorcycles, this weather-resistant amp delivers huge power without getting in your way. Ensuring incredible sonic performance and long speaker life has never been easier with a variable 12dB crossover and independent gains. A wide range of input levels make this amp easy to hook up with virtually any factory or aftermarket radio. This KPX.4 Amplifier delivers as much as 75 watts per channel (4 channels driven), or 150 watts into two sets of bridged channels.

General Features:

• 4-Channel Amplifier
• Weather-resistant design
• Dynamic Power: 350 Watts
• RMS Power Output: 45W X 4 Stereo (4 Ohm)
• RMS Power Output: 75W X 4 Stereo (2 Ohm)
• RMS Power Output: 150W X 2 Mono (4 Ohm)
• Provides power for two or four speaker systems
• Signal-to-Noise Ratio: 90dB
• Frequency Response: 20Hz – 20kHz
• Fader On/Off Switch
• Selectable Electronic Crossover
• Fits under motorcycle fairings

UPC Code 713034043966

---

The DSC6504 6-1/2-Inch Coaxial Speakers are the ideal upgrade for your car doors. Using zero protrusion PEI tweeters ensures you get every bit of clarity you need, without interfering with factory grilles. A stamped steel framework supports a ribbed, UV-treated foam surround and rigid polypropylene cone with EVCTM (Extended Voice Coil) technology, for the best sonic quality.

These speakers will handle 60 watts RMS and 240 Watts Max per speaker. They include 1/2" tweeters to really hit those high notes with stiff polypropylene cones to hit low bass notes as low at 40 Hz. These speakers are a drop-in coaxial upgrade with the flexibility to fit nearly any vehicles doors for a vast improvement over factory sound.

General Features:

• Power Handling: Peak: 240 watts
• Recommended Power Range: 6 - 60 watts RMS per channel.
• Rigid polypropylene cone material.
• Polyester foam speaker surround.
• Stamped steel basket.
• EVC (Extended Voice Coil) technology, for excellent sound.
• 1/2" zero protrusion polyetherimide tweeter.
• Neodymium tweeter magnet.
• PEI (polyether imide) balanced dome tweeter.
• Top-mount Depth: 1-13/16"
• 4 ohms impedance.
• Frequency Response: 40 - 20,000 Hz.
• Sensitivity: 90dB.
• Grilles included.

UPC Code 713034077671

---

The Power Sport Motorcycle Universal Amplifier Wiring Kit includes the following 6 foot length of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder, 60 amp fuse protected by a black nylon braid, Pre-terminated ring terminals, (2) 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh and 4"x6" hook and loop mounting pad for micro-amplifiers.

Amplifier Wiring Kit:

• Designed tor motorcycles
• 6 feet of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder and 60 amp fuse protected by a black nylon braid
• Pre-terminated ring terminals make connections to the battery simple
• Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh makes upgrading the factory speaker wires or adding new speakers a smart choice
• Upgrading Harmon Kardon System – Two 47-ohm .5 watt resistors to keep the factory radio outputs active
• All the necessary installation hardware is included along wtth a 4 × 6 inch hook and loop mounting pad for micro-amplifiers to hold the amplifier securely in place

UPC Code 086429332267

---

Enrocks EORA102 is a universal AM/FM antenna that is easy to hide in your motorcycle, automobile, truck, and even boat! Just hide it anywhere. Simply hook up, peel, and stick. Will stick on to glass, roof, headliner, inside the camper, mounts to any surface.

General Features: 

• Electronic Stereo Radio Hidden Amplified Antenna Kit
• Hidden Amplified Antenna Design for Direct Replacement
• Covering all AM / FM Broadcast Radio
• Input: Thoroughfare / Output Impedance: 750HM
• Dimension: 3.75" X 1" X 0.75"

Installation Instructions

• Connect Antenna Plug of this unit to Car Radio Antenna Socket
• Connect Black 12v positive to accessories
• Secure Antenna to clean flat surface
• Connect Silver wire to good ground
• If extra gain/pickup is required, connect the red wire to positive side of rear window demister. (this connection is optional)​​

UPC Code 728120484479

---

A ground-breaking virgin-PVC, Hyper-Flex insulation and multi-strand construction allows you to bend, twist, and contort the cable in any way imaginable for an ultimate installation experience while delivering maximum current flow; remains ultra-flexible under hot or cold temperature extremes; transfers the cleanest audio signal possible by using tightly twisted, silver-tinned OFC copper conductors; zip line to easily remove outer insulation.

Speaker Wire:

• 20 Feet
• 16 Gauge
• Silver-tinned OFC (oxygen-free copper)

UPC Code 632016086404