2x JBL 6.5" 300 Watt Max Power Midrange Woofer Speakers, 4-Channel Class D Amplifier w/Front Wiring Harness + Install Kit, Power Block, Antenna Booster, Wire (Fits 2014+ Harley Davidson FLH/FLT)

$623.99
$389.90
(You save $234.09 )
SKU:
R-1-JBLSPKSW150W65-PA454-BC-9703
UPC:
027581923252
Condition:
New
Weight:
33.70 LBS
Minimum Purchase:
1 unit
Shipping:
Calculated at Checkout

2x JBL 6.5" 300W Max Woofer Speakers, 4-Channel Amplifier w/Fairing Amp Wiring

Metra BC-9703 Amplifier Wiring Kit for Front Fairing - Fits 2014+ Harley Davidson FLH/FLT




Installing aftermarket amplifiers in the front fairings of your Harley-Davidson motorcycle? This single or dual-amp installation kit will make wiring your connections so much easier! Constructed with oxygen-free copper for the best possible conductivity and audio performance.

Features:

  • Single or dual-amp installation harness
  • Designed for installing aftermarket amplifiers in front fairings
  • Oxygen-free copper wiring for better conductivity and performance
  • Quick-disconnect for each amplifier
  • 3-year limited warranty
What’s in the box:
  • 8 gauge 5.5' power and ground wires
  • Over-mold split to (2) 10 gauge power and ground wires
  • 60 amp mini ANL fuse and holder
  • Ignition T-harness included for amp turn-on

UPC Code 086429416110
JBL Apex PA454 Weather-Resistant 4-Channel Class D 450 Watt Peak Power Amplifier




The JBL Apex PA454 weather-resistant 4-channel multi-application Class D amplifier features an ultra-compact aluminum chassis and small footprint design to allow for versatile installation. The Apex Series PA454 powersports amplifier delivers efficient Class D power and is designed to fit into tight spaces and withstand outdoor environments without missing a beat. Available with 4-channels of output power, the Apex Series PA454 includes selectable front/rear electronic crossover frequency adjustment for quick and easy installation.


General Features:

  • Ultra-Compact Aluminum Chassis
  • Conformal Coated PCB
  • Big Dynamic Power
  • Full-Range Outputs and Selectable Crossovers
  • High and low level Inputs
  • Max Power: 450W peak
  • RMS Power Output @ 4O: 45W x 4, <1% THD+N
  • Selectable hi-pass filter: off, 60-, 80-, 120Hz @ 12dB/octave
  • Frequency Response: 20Hz – 20kHz
  • Signal-to-Noise Ratio: >75dB (ref 1W output @ 4O)
  • Fuse rating: 15A

UPC Code 050036359092
JBL SHOCKWAVE150W65 6.5" 300 Watt Max Power Midrange Woofer Car Audio Speakers (Pair)




JBL Shock Wave 6.5" midrange speakers features exceptionally high sensitivity and super powerful magnetic system to deliver louder and better sound quality. Pressed pulp cone with reinforced double fabric suspension to ensure steady, balanced sound and long performance life. Designed with EVA vibration protection gasket with easy and reliable connector.


General Features:

  • Speaker Size: 6-1/2"
  • Design: Mid-range
  • Woofer Composition: Paper
  • Woofer Surround: Cloth
  • Peak Power Handling: 300 watts
  • RMS Power Handling: 150 watts
  • Total Peak Per Pair/Set: 600 watts
  • Total RMS Per Pair/Set: 300 watts
  • Sensitivity: 96 dB
  • Frequency Response: 80 - 20,000 Hz
  • Impedance (Per Voice Coil): 4 ohms
  • Shallow Mount Installation: No
  • Magnet Type: Ferrite

UPC Code 050036389006
Metra ML-AK8-10 8 Gauge Amplifier Wiring Marine Kit - 10ft. w/ Circuit Breaker




Power your marine amplifier with a wiring kit that can withstand the harsh environment and still deliver full sound performance. Fully tinned wiring ensures that these amp kits won’t corrode or oxidize and turn green after a season on the water. Oxygen-free copper provides a reliable connection with maximum conductivity. By using 100% virgin copper the tin won’t flake off, something commonly seen when using recycled copper materials. While it is also common to tin just the tips of the wire for cost savings, this practice does not actually provide any benefits. Metra’s amp kits use fully tinned copper wire from top to bottom that can withstand a harsh marine environment and salty air. The ignition-protected 50-amp circuit breaker is IP67 rated with stainless steel connection points for corrosion resistance

Amplifier Wiring Kit:

  • Marine compliant amplifier wiring kit
  • Fully tinned 100% virgin copper wire
  • BC5W2 marine compliant jacket
  • 50-amp marine circuit breaker is rated IP67 with stainless steel connection points for corrosion resistance
  • Easy to solder tinned wiring
  • Connectors, ring terminals, and wire ties included

What’s in the box:

  • (1) 8-gauge tinned oxygen-free copper side-by-side red power and yellow ground wire (10ft.)
  • (1) 18-gauge tinned oxygen-free copper blue remote turn-on wire (18ft.)
  • (2) 8-gauge ring terminal with shrink tube and logo, pre-terminated on each end of the 2ft. red wire
  • (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on 8ft. red wire
  • (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on yellow wire
  • (1) Ignition protected circuit breaker (50-amp)

UPC Code 086429416820
Enrock EORA102 Universal 12V Car Truck Motorcycle Amplified Stereo Radio Am FM Hide Away Antenna Signal Reception Amplifier Booster Kit, Black




Enrocks EORA102 is a universal AM/FM antenna that is easy to hide in your motorcycle, automobile, truck, and even boat! Just hide it anywhere. Simply hook up, peel, and stick. Will stick on to glass, roof, headliner, inside the camper, mounts to any surface.


General Features: 

  • Electronic Stereo Radio Hidden Amplified Antenna Kit
  • Hidden Amplified Antenna Design for Direct Replacement
  • Covering all AM / FM Broadcast Radio
  • Input: Thoroughfare / Output Impedance: 750HM
  • Dimension: 3.75" X 1" X 0.75"

Installation Instructions

  • Connect Antenna Plug of this unit to Car Radio Antenna Socket
  • Connect Black 12v positive to accessories
  • Secure Antenna to clean flat surface
  • Connect Silver wire to good ground
  • If extra gain/pickup is required, connect the red wire to positive side of rear window demister. (this connection is optional)​​

UPC Code 728120484479
Metra MPS-3PB 4 AWG High Current Quick Disconnect Power Block




This durable, quick disconnect allows for convenient, safe installation and servicing of amps, active subwoofers, or removable winches in powersport and marine applications. This product is designed for use in the harshest environments, unlike standard audio equipment that is not suited for off-road applications. This important part of your installation can resist the elements to keep the system working great throughout all of your rugged outdoor adventures.

Power Block:

  • 2.5” W x 2” L x 2.25” D
  • Accepts 4 AWG power and ground
  • Remote turn-on lead
  • Machined brass block
  • Has rubber boot to protect from the elements

UPC Code 086429430413
Enrock 20-Feet 16 Gauge Marine Grade Tinned Speaker Wire -Oxygen Free Copper (OFC) 16-AWG




A ground-breaking virgin-PVC, Hyper-Flex insulation and multi-strand construction allows you to bend, twist, and contort the cable in any way imaginable for an ultimate installation experience while delivering maximum current flow; remains ultra-flexible under hot or cold temperature extremes; transfers the cleanest audio signal possible by using tightly twisted, silver-tinned OFC copper conductors; zip line to easily remove outer insulation.

Speaker Wire:

  • 20 Feet
  • 16 Gauge
  • Silver-tinned OFC (oxygen-free copper)

UPC Code 632016086404

1 Year Manufacturer Warranty