Pyle Bluetooth Marine Radio USB CD AM/FM, 6.5" LED Speakers & Wires, Amplifier
The Pyle Marine Audio Stereo Kit is perfect for all boat and watercraft sound system setups. The included Bluetooth Stereo Receiver serve perfectly to replace an existing audio system or can be setup as a new application upgrade -- thanks to universal mounting ability. The included Single DIN universal standard headunit. Headunit features include Bluetooth Wireless Music Streaming Ability, Built-in Microphone for Hands-Free Talking, AM/FM Radio with 30 station memory, USB Flash & SD Memory Card Readers, MP3 Digital Audio Support, along with an Aux (3.5mm) Input Jack -- allowing you to connect and stream audio from even more external devices. Control it all via the digital LCD display screen or use the included remote control.
Pyle PLCDBT95 - Bluetooth marine stereo radio receiver hands-free talking, CD player, MP3/USB/SD readers, AM/FM radio
- head unit receiver: in-dash console marine stereo system
- Bluetooth wireless music streaming
- Built-in microphone for hands-free talking
- front loading CD player
- USB flash drive & SD memory card readers
- MP3 digital audio file compatibility
- am/FM radio
- 30 station memory presets
- aux (3.5mm) Input connector jack
- ability to connect additional external devices
- (smartphones, MP3 players, tablets)
- rear RCA (L/R) Output connector jacks
- illuminated button controls
- LCD digital display panel
- ID3 Tag song readout information: name, title & artist
- bass, treble, balance, fader adjustment
- EQ audio configuration
UPC Code 728120499381
The JBL Tower X Marine Speaker system is ready to take your next outdoor adventure to the next level. The fully marinized speakers deliver a JBL pro sound experience complete with RGB lighting to bring it to life. Their rigid Polypropylene long-throw woofer cones deliver great bass to ensure you never miss a beat, coupled with a titanium horn-loaded compression tweeter and fidelity for accurate reproduction. The woofer and tweeter assembly incorporates a patent pending design that helps to project the sound over the stern of the boat, directly to the wave rider's sweet spot, while providing great sound inside the boat.
General Features:
- Marine Rated
- High Output Design
- MultiColor RGB LED Lighting
- 360 Degree Bracket Design
- Individually Voiced
- Harman Standard Reliability Tested
- Power Handling: 100Wrms, 300W peak
- Sensitivity (@ 2.83V): 90dB
- Frequency Response: 50Hz – 20kHz
- Voice Coil Diameter: 1.5in. (38.5mm)
- Impedance: 4 ohms
- Adjustable bar diameter: From 1.75in - 3in. (44.5mm - 76.2mm)
What's In The Box?:
- 2 x Enclosed speaker assembly
- 2 x Two-piece bracket assembly
- 4 x Rubber pad
- Mounting hardware: 2x hex head screws, 2x M6 bolts, 4x M8 x 35mm bolts, 4x M8 x 55mm bolts, 4x
- Flat-washers, 4x Lock-washers, 2x M8 hex-keys, 2x M6 hex-keys
- 2 x RGB lighting cable
- 2 x Security cable
- 2 x Neoprene cover
- 2 x JBL sticker
- 1 x Quick start guide
UPC Code 050036354431
Enrock's EEA720.4 4-channel amplifier was designed compact yet rugged. The outdoors can be a tough spot for audio gear so Enrock considered the salt, spray and sunlight when designing this Class D amplifier. With 45 watts RMS per channel this amplifier will drive your speakers no matter the application you are using it for. It’s compact enough for a bike and powerful enough for a car. You’ll have no trouble hearing your tunes over the wind and waves with this powerful amplifier.
Weather Resistant for Marine Application
Durable and Powerful for Automotive Use
Compact and rugged for Off-Road Installation
This compact amplifier will fit into a storage compartment on a boat, motorcycle, ATV, or car with optimal performance, despite its size. Should you decide to add a pair of subwoofers you can bridge this amp to a 2-channel mode and send 120 watts to each subwoofer, or switch to 3-channel mode to get a pair of speakers and a subwoofer. With high-pass and low-pass filters, plus bass boost, you can customize your sound output just the way you take your tunes.
EEA720.4 GENERAL FEATURES:
- 4-channel marine/powersports/ car amplifier
- 45 watts RMS x 4 at 4 ohms (60 watts RMS x 4 at 2 ohms)
- 120 watts x 2 bridged at 4 ohms
- Class D amp technology
- 720 Watts Peak Power
- variable high- and low-pass filters
- Sealed Chassis for use in harsh environments
- Ultra-efficient full range class D operation
- Built-in Crossover- maximum flexibility
- 2 or 4 channel input
- Signal to noise ratio 97db
- High pass filter 120Hz/80Hz
- Input range: 200mV-10V
- Frequency Response: 20Hz to 20KHz
UPC Code 728120454069
The Enrock EKMR2 Marine Wire Antenna provides excellent radio reception signals to the audio system on your automobile, watercraft vehicles. The flexible wire makes it the perfect hideaway antenna, while the corrosion-resistant rubber exterior confirms that it will stand up to salt and spray. The 40inch long flexible wire will make mounting it a breeze. Knowledgeable boaters realize that even the most expensive radio will perform poorly with a second rate antenna that saves money up front. A quality antenna is the crux of reliable performance in any marine radio. From the largest seagoing ships to the smallest bass boats, Enrock antennas have held up for years under the worst marine conditions, always performing to their maximum design capabilities.
General Features:
- Weather Resistant.
- 40" Braided Cable.
- Full AM/FM reception.
- No drilling required.
- Simple and easy install.
- Superior construction.
- Easy to mount.
- Compatible with a variety of marine stereo devices.
UPC Code 799861388647
This Enrock marine speaker wire is water-resistant, so it's ideal for use in your new marine installation. This blue and white wire is 18 gauge and comes on a 50 ft. spool. Hear your music with clarity and accuracy with this Enrock marine grade wire.
UPC Code 728120484530