2x Infinity KAPPA 1050M 10" 900W RGB LED Titanium Boat Subwoofer, Mono Amplifier
Infinity KAPPA 1050M 10" Marine subwoofer feature Plus One polypropylene woofer and midrange cones, Mylar tweeter domes (Except Subwoofer), one piece cast polymer baskets, sealed magnets, and rubber woofer surrounds for high SPL performance. Wind, water or engine noise will not drown them out, UV resistant in a marine grade IPX3 (IPX5 from front) weather resistant and include RGB LED illumination.
General Features:
- 10" 3-Way Subwoofer
- Power Handling: 300 watts RMS
- Power Handling: 900 watts Max
- Sensitivity: 89dB
- Frequency Response: 20-2KHz
- Impedance 2 and 4-ohms, Switch Selectable Impedance (SSI)
- 7 color RGB LED Lights - expandable with remote
- Marine Grade IPX3 and IPX5 rated
- UV resistant
- Plus One polypropylene woofer
UPC Code 050667373115
This JVC amplifier is the durable and powerful product you need to give your system a much needed boost. This amplifier is certified waterproof, dustproof, rustproof, and vibrationproof. A Drain Tunnel Structure is employed for creating a gap between the amplifier and the installation surface. This prevents saltwater and sand from accumulating on the bottom, increasing corrosion protection. Thicker terminal connection points and increased wire size enables maximum current flow and higher output for better low frequency response and cleaner output, resulting in powerful bass reproduction. Magnetic Shielding for the output coils reduce radiated noise, delivering smooth and accurate sound.
General Features:
- Compact Mono Digital Amplifier for Car, Marine, UTV and Motorcycle
- 600W Max Power
- 300W RMS Power @ 2 ohms
- Wired Level Control Included
- Waterproof IPX7/IPX6
- Dustproof IP6X
- Rustproof ASTM B117
- Vibrationproof
- High-Quality Capacitors
- Speaker Level Input
- LPF Frequency Control
- BassBoost Freq Switch
- Frequency Response (+0, -3dB): 20Hz - 200Hz
- Input Sensitivity (+0, -3dB): 0.2V - 5.0V
- Signal to Noise Ratio: 97dB
- Low Pass Filter Frequency (-12dB/oct.): 50Hz - 200Hz (variable)
- Bass Boost Control: 0-+18dB
- Bass Boost Frequency: 40Hz / 60Hz / 80Hz
UPC Code 046838003554
Power your marine amplifier with a wiring kit that can withstand the harsh environment and still deliver full sound performance. Fully tinned wiring ensures that these amp kits won’t corrode or oxidize and turn green after a season on the water. Oxygen-free copper provides a reliable connection with maximum conductivity. By using 100% virgin copper the tin won’t flake off, something commonly seen when using recycled copper materials. While it is also common to tin just the tips of the wire for cost savings, this practice does not actually provide any benefits. Metra’s amp kits use fully tinned copper wire from top to bottom that can withstand a harsh marine environment and salty air. The ignition-protected 50-amp circuit breaker is IP67 rated with stainless steel connection points for corrosion resistance
Amplifier Wiring Kit:
- Marine compliant amplifier wiring kit
- Fully tinned 100% virgin copper wire
- BC5W2 marine compliant jacket
- 50-amp marine circuit breaker is rated IP67 with stainless steel connection points for corrosion resistance
- Easy to solder tinned wiring
- Connectors, ring terminals, and wire ties included
What’s in the box:
- (1) 8-gauge tinned oxygen-free copper side-by-side red power and yellow ground wire (10ft.)
- (1) 18-gauge tinned oxygen-free copper blue remote turn-on wire (18ft.)
- (2) 8-gauge ring terminal with shrink tube and logo, pre-terminated on each end of the 2ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on 8ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on yellow wire
- (1) Ignition protected circuit breaker (50-amp)
UPC Code 086429416820
