6x9" Speakers, 10" Pre-Loaded Subwoofer Enclosure, 4-Channel Amplifier, Amp Kit
Kickers DXA250.4 features separate controls for the front and rear channels so it can work with a variety of different speakers or subs. High-pass filters clear out rumble from small speakers so they can play more efficiently, while low-pass filters adjust the frequencies going to your subs, so they'll play bass cleanly. Bass boosts on the front and rear channels.
The DXA250.4 4-channel amplifier can send 30 watts RMS to each of your front and rear speakers from a compact chassis that'll fit into a lot of places in your vehicle. This amp delivers around three times the power of a typical factory radio, so it'll add a lot of clarity and punch to your music. You can also use the front channels on the DXA250.4 to power your front speakers, and bridge the rear channels together to power a subwoofer with 125 watts RMS.
General Features:
- CEA-2006 compliant.
- Power Rating:
-30 watts RMS x 4 at 4 ohms.
-60 watts RMS x 4 at 2 ohms. -125 watts RMS x 2 bridged at 4 ohms - Variable low-pass filter (50-200 Hz, 12 dB/octave)
- Fixed subsonic filter (25 Hz, 24 dB/octave)
- Variable bass boost (0-12 dB at 40 Hz)
- Class D amp technology.
- Differential-balanced inputs help eliminate noise.
- Electronic Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave.
- Preamp inputs and outputs.
- Frequency Response: 25-200 Hz.
- Signal-to-Noise Ratio: >95 dB.
- Subsonic Filter: 25Hz, 24dB/octave.
- Input Sensitivity:
-High Level: 250mV–10V
-Low Level: 125mV–5V - Dimensions: 12-3/8"W x 2-3/8"H x 7-1/8"D
UPC Code 713034078722
This Kicker 8 Gauge Power Amplifier Wiring Kit includes all the necessary hardware and wire to power one amplifier and is designed specifically for car audio systems up to 1000 watts. The included premium power/ground cable is made from 100% oxygen-free copper and is true-to-gauge for ultimate power transfer. This PK8 power amp kit includes 17-feet of 8 Gauge power cable, 2-feet of 8 Gauge ground cable, 17-feet of 16 Gauge remote turn-on wire, 2-channel RCA cable, Maxi Fuse holder, 60 Amp fuse and more. KICKER® amp power kits feature top-quality Hyper-Flex™ power, ground and turn-on cables. A heavy-duty AFS fuse holder, fuse, terminals and zip ties come in the kit as well. One additional year of amplifier warranty is included if purchased with a KICKER amp.
Kicker PK8 General Features:
- 8 Gauge OFC Power Amplifier Installation Kit
- Designed specifically for car audio systems up to 1000 watts
- Premium power and ground wire provides optimal power transfer
- Made from 100% oxygen-free copper for a pure uninterrupted transfer of power
- Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
UPC Code 713034064978
Kicker's 43TC104 Comp sub features a stiff injection-molded polypropylene cone supported by a double-stitched ribbed foam surround for deep excursion. Kicker's back-braced cone design keeps the woofer stable during those hard hits, while the perimeter venting system helps cool the sub's internal parts during demanding performances. A strong steel basket provides a stable foundation that won't flex during hard use.
This loaded enclosure puts a thumping 10" subwoofer behind the seat of a truck or in any vehicle that's low on space. The rugged ported box was designed specifically for the subwoofer, so you can count on getting maximum performance
- General Features:
- Handles up to 150 watts RMS (300 watts peak power)
- Ported truck-style enclosure with one 10" Comp subwoofer.
- 3/4" medium-density fiberboard construction covered with carpet.
- Injection molded SoloKon cone.
- Optimized Polyfoam Ribbed Surround.
- Extremely rigid cone, along with 360 degree back bracing eliminates distortion.
- 4-ohm Enclosure impedance.
- Double stitched surround for enhanced durability.
- Tinsel leads woven into the spider with Kicker's Spiralead technology.
- Single high-temperature voice coil.
- 45oz. Magnet structure.
- Frequency response: 30-500 Hz.
- Sensitivity: 94 dB.
- Dimensions: 21-3/4"W x 15"H x 7-11/16"D1 x 4-3/4"D2.
UPC Code 713034078685
The 44KSC6904 speakers feature a big 6"x9" polypropylene woofer with a powerful magnet, giving you a natural sound with plenty of punch in the lower frequencies while the 1" silk dome tweeter delivers every ounce of smoothness you'd want in your music's vocal and instrumental details. These speakers are the perfect upgrade from factory speakers.
General Features:
- Speaker Design: 2-Way
- Woofer: 6x9"
- Tweeter: 1"
- Rated Impedance: 4 Ohms
- Peak Power Handling: 300 Watts
- Continuous Power Handling: 150 Watts
- Sensitivity: 92 dB
- Frequency Response: 30-21k Hz
- Mounting Hole Diameter: 5-11⁄16" x 8-7⁄16"
- Top Mount Depth: 3-3⁄16"
- Bottom Mount Depth: 3-11⁄16"
- Tweeter Protrusion: 1⁄16"
- Grilles: Yes
- Tweeter Magnet Material: Neodymium
- Tweeter Dome Material: Silk
- Tweeter Design: Balanced Dome
- Woofer Cone Material: Polypropylene
- Woofer Surround Material: Rubber
UPC Code 713034079095