Kicker 15" 4 Ohm 1200W Subwoofer, 6.5" Speakers, 4-Channel Amplifier, Amp Kit
Kickers DXA250.4 features separate controls for the front and rear channels so it can work with a variety of different speakers or subs. High-pass filters clear out rumble from small speakers so they can play more efficiently, while low-pass filters adjust the frequencies going to your subs, so they'll play bass cleanly. Bass boosts on the front and rear channels.
The DXA250.4 4-channel amplifier can send 30 watts RMS to each of your front and rear speakers from a compact chassis that'll fit into a lot of places in your vehicle. This amp delivers around three times the power of a typical factory radio, so it'll add a lot of clarity and punch to your music. You can also use the front channels on the DXA250.4 to power your front speakers, and bridge the rear channels together to power a subwoofer with 125 watts RMS.
General Features:
- CEA-2006 compliant.
- Power Rating:
-30 watts RMS x 4 at 4 ohms.
-60 watts RMS x 4 at 2 ohms. -125 watts RMS x 2 bridged at 4 ohms - Variable low-pass filter (50-200 Hz, 12 dB/octave)
- Fixed subsonic filter (25 Hz, 24 dB/octave)
- Variable bass boost (0-12 dB at 40 Hz)
- Class D amp technology.
- Differential-balanced inputs help eliminate noise.
- Electronic Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave.
- Preamp inputs and outputs.
- Frequency Response: 25-200 Hz.
- Signal-to-Noise Ratio: >95 dB.
- Subsonic Filter: 25Hz, 24dB/octave.
- Input Sensitivity:
-High Level: 250mV–10V
-Low Level: 125mV–5V - Dimensions: 12-3/8"W x 2-3/8"H x 7-1/8"D
UPC Code 713034078722
This Kicker 8 Gauge Power Amplifier Wiring Kit includes all the necessary hardware and wire to power one amplifier and is designed specifically for car audio systems up to 1000 watts. The included premium power/ground cable is made from 100% oxygen-free copper and is true-to-gauge for ultimate power transfer. This PK8 power amp kit includes 17-feet of 8 Gauge power cable, 2-feet of 8 Gauge ground cable, 17-feet of 16 Gauge remote turn-on wire, 2-channel RCA cable, Maxi Fuse holder, 60 Amp fuse and more. KICKER® amp power kits feature top-quality Hyper-Flex™ power, ground and turn-on cables. A heavy-duty AFS fuse holder, fuse, terminals and zip ties come in the kit as well. One additional year of amplifier warranty is included if purchased with a KICKER amp.
Kicker PK8 General Features:
- 8 Gauge OFC Power Amplifier Installation Kit
- Designed specifically for car audio systems up to 1000 watts
- Premium power and ground wire provides optimal power transfer
- Made from 100% oxygen-free copper for a pure uninterrupted transfer of power
- Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
UPC Code 713034064978
Kicker's 44CWCS154 15" subwoofer features a flex-resistant polypropylene cone for hard-hitting lows without distortion, while the ribbed foam surround promotes long excursion and helps to keep the cone on target. The sub's steel basket provides a reliable foundation for big bass, and its extensive venting ensures long-lasting performance that won't break down when the bass gets heavy.
- 15" 4-ohm subwoofer
- injection-molded polypropylene cone
- ribbed foam surround
- power handling: 600 watts RMS
- peak power handling: 1200 watts
- frequency response: 25-500 Hz
- sensitivity: 90.3 dB
- top-mount depth: 7"
- sealed box volume: 2.25 - 5.00 cu. ft.
- ported box volume: 3.00 - 4.00 cu. ft.
UPC Code 713034078937
These CS-Series 6-1/2-inch Coaxial Speakers are the perfect way to upgrade your factory speakers.
CS-Series Coaxials deliver remarkable performance and ultra-clean bass with a heavy-duty motor/magnet structure not found in stock speakers. The stamped-steel framework supports a rigid polypropylene cone with EVC (Extended Voice Coil) technology for the best sonic quality. Using zero-protrusion PEI tweeters with neodymium magnets, you get the clarity you need without interfering with factory grilles.
These CS speakers work best with 100 watts of recommended power.
General Features:
- Speaker Design: 2-Way Design
- Woofer Size: 6.5"
- Tweeter Size: .5"
- DC Resistance: 3.3
- 300W Peak Power
- 100W RMS Continuous Power
- 90dB Sensitivity
- 40-20kHz Effective Frequency Range
- 4-13/16" Mounting Hole Diameter
- 3/8" Top Mount Depth
- 1-11/16" Bottom Mount Depth
- Grilles Included
- Fits nearly every car made
- Zero-protrusion tweeters to fit nearly any factory depth
- Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion
- UV-treated poly-foam surround resists heat or direct sunlight
- Large woofer magnet in a heavy-duty motor for ultra-clean bass
- PEI-tweeter construction provides superb clarity
- Neodymium tweeter magnets allow for increased volume in high frequencies
- Steel mesh grilles included for speaker protection
UPC Code 713034088363