KICKER KMA600.4 4x150w 4-Ch Weather-Resistant Full-Range Amp, with Marine 8 Gauge Amp Power Kit

Using a Class-D power plant, this amp features a variable bass boost with KickEQ, giving you as much as 6dB of extra bump. Powering as many as eight speakers, this amplifier makes your entire boat sound like a floating concert! A powerful 12dB crossover is also included, letting you quickly tune your system to perfection. This KM-Series amplifier delivers 150 watts into four channels, or 300 watts bridged into two channels. See below for more details.

General Features:

• Class D Power Supply
• 725 Watts of Dynamic Power
• Four-Channel Amplifier with Bridging Capability
• Conformal-Coated Circuit Board
• Variable 12dB Crossover
• KickEQ Variable 6dB Bass Boost
• Real Marine ABYC/NMMA-Compliant Power Connections
• 316L Stainless-Steel Hardware Included
• POWER [watts/ch], 2 OHM STEREO: 150 x 4
• POWER [watts/ch], 4 OHM BRIDGED MONO: 300 x 2
• DYNAMIC POWER [watts]: 725
• DIMS [in] all models 2-5/16H x 7-1/8W x ___L: 12-7/16
• DIMS [cm] all models 5.9H x 18.0W x ___L: 31.5
• FREQUENCY RESPONSE [Hz]: 10-20k, +0/-1dB
• High Level Sensitivity: 250mV-10V
• Low Level Sensitivity: 125mV-5V
• SIGNAL-TO-NOISE RATIO: >95dB, a-weighted, re: rated power
• ACTIVE CROSSOVER: 12dB/octave, variable 50-200Hz, selectable high pass, low pass or all pass
• KickEQ BOOST: Variable 0-6dB, centered @ 40Hz

This Kicker amp kit meets the highest industry standards for marine use. Includes a fuse, fuse holder, power and ground cabling plus remote wire. This kit is the all in one solution for power delivery. The full-spec OFC cable is tinned in anti-corrosive nickel.

General Features:

• The kit comes complete with fuse, fuse holder, power and ground cabling plus remote wire.
• Full-spec OFC cable tinned in anti-corrosive nickel
• MRBF marine fuse included

Amp Power Kit Box Includes:

1. 20 ft 8 awg red power wire with 5/16” tin plated ring terminal insulated with marine grade heat shrink for corrosion resistance.
2. 20 ft 8 awg yellow ground wire with 5/16” tin plated ring terminal insulated with marine grade heat shrink for corrosion resistance.
3. 20 ft 18ga blue remote wire.
4. 1 KMFMF marine rated battery fuse holder.
5. 1 MRBF60 – 60A marine rated batter fuse.
6. 2 18ga fork terminals with blue boots.
7. 20x 6” zip ties