Infinity 7005A 5CH Amp, 2x 6.5" + 2x 6.5" Speakers, 12" 1500W Car Subwoofer
nfinity's Reference 7005A 5-channel amplifier provides a full system solutions without breaking a sweat, and it'll look good doing it. It delivers 50-Watts RMS to each of the front and rear speakers, and a ground pounding 500-Watts RMS to the subwoofer channel a much better balance of "speaker-to-sub" power than most of conventional 5-channel amplifiers on the market.
General Features:
- 50 watts RMS x 4 + 320 watts RMS x 1 at 4 ohms
- 65 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms
- 140 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms
- variable high- and low-pass filters (32-320 Hz, 12 dB/octave) on front and rear channels
- low-pass filter (32-320 Hz, 12 dB/octave) on subwoofer channel
- bass boost on subwoofer channel (0-12dB at 45Hz)
- phase switch on subwoofer channel (0, 180 degrees)
- preamp and speaker-level inputs
- fuse rating 30A x 3
- 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
- WxHxD=360mm x 55.5mm x 180mm WxHxD=14-3/16” x 2-3/16" x7-1/8”
UPC Code 050667375478
The Stage3 68CF 6-1/2" (165mm) two-way component speaker embodies JBL’s legendary sound, delivering powerful audio in the car. The woofer cone is manufactured using a laser-etched tool, features the patented Plus One™ design for increased surface area, and is reinforced with 10% glass fiber to play deeper, more resonant bass. Additionally, the edge-driven silk dome tweeter ensures improved sound distribution, resulting in crystal-clear highs and creating an immersive listening experience that elevates your car audio setup. The speaker’s true 4-ohm load design maximizes power output from your head unit or amplifier, compensating for system resistance to ensure optimal performance. Additionally, the speakers incorporate post-consumer recycled plastic components, PVC-free wiring, and packaging printed with soy-based inks, thereby minimizing environmental impact. Finally, precise fitment is critical to the success of this speaker family—ensuring seamless integration and consistent acoustic performance across vehicle platforms.
Features:
- 6.5" 2-Way Component Car Speaker without Grille
- Power Handling: 95W RMS, 760W peak
- Sensitivity: 91dB
- Frequency Response: 55Hz – 20kHz
- Impedance: 4 Ohms
UPC Code 050036417235
The JBL Stage3 68MF 6-1/2" (165mm) three-way speaker embodies JBL’s legendary sound, delivering powerful audio in the car. The woofer cone is manufactured using a laser-etched tool, features the patented Plus One™ design for increased surface area, and is reinforced with 10% glass fiber to play deeper, more resonant bass. Additionally, the PEI balanced dome tweeter ensures improved sound distribution, resulting in crystal-clear highs and creating an immersive listening experience that elevates your car audio setup. The speaker’s true 4-ohm load design maximizes power output from your head unit or amplifier, compensating for system resistance to ensure optimal performance. Additionally, the speakers incorporate post-consumer recycled plastic components, PVC-free wiring, and packaging printed with soy-based inks, thereby minimizing environmental impact. Finally, precise fitment is critical to the success of this speaker family—ensuring seamless integration and consistent acoustic performance across vehicle platforms.
Features:
- 6.5" 3-Way Car Speaker without Grille
- Power Handling: 70W RMS, 560W peak
- Sensitivity: 91dB
- Frequency Response: 55Hz – 20kHz
- Impedance: 4 Ohms
UPC Code 050036417266
A subwoofer that puts you in the driver’s seat.
JBL believes sound quality should never be compromised and the Stadium subwoofers make sure you don’t have to compromise flexibility, either. That’s because these high-performance subwoofers feature SSI™ (Selectable Smart Impedance), an exclusive impedance switch that lets you select the optimum impedance—2 or 4 ohms—providing multiple system configurations and flexibility.
A special aero-cooling design keeps the voice coil cool even at high output levels. This feature coupled with oversized voice coils increases power handling and ensures long term reliability. More power, more reliability, more flexibility—and no compromises. When you’re ready to step up, Stadium is your subwoofer.
General Specifications
- Power Handling 500W RMS, 1500W peak
- Sensitivity (@ 2.83V) 92dB
- Frequency Response 25Hz – 175Hz
- Voice Coil Diameter 2 in. (50mm)
- Impedance 2 or 4 ohms
- Cutout Diameter 11-1/5" (285mm)
- Mounting Depth 7" (180mm)
What's in The Box?
- 1 x 12" Subwoofer
- 1 x Owner Manual
- 1 x Screw Bag
UPC Code 050036381185
Power your marine amplifier with a wiring kit that can withstand the harsh environment and still deliver full sound performance. Fully tinned wiring ensures that these amp kits won’t corrode or oxidize and turn green after a season on the water. Oxygen-free copper provides a reliable connection with maximum conductivity. By using 100% virgin copper the tin won’t flake off, something commonly seen when using recycled copper materials. While it is also common to tin just the tips of the wire for cost savings, this practice does not actually provide any benefits. Metra’s amp kits use fully tinned copper wire from top to bottom that can withstand a harsh marine environment and salty air. The ignition-protected 100-amp circuit breaker is IP67 rated with stainless steel connection points for corrosion resistance
Features:
- Marine compliant amplifier wiring kit
- Fully tinned 100% virgin copper wire
- BC5W2 marine compliant jacket
- 100-amp marine circuit breaker is rated IP67 with stainless steel connection points for corrosion resistance
- Easy to solder tinned wiring
- Connectors, ring terminals, and wire ties included
- What’s in the box:
- (1) 4-gauge tinned oxygen-free copper side-by-side red power and yellow ground wire (10ft.)
- (1) 18-gauge tinned oxygen-free copper blue remote turn-on wire (18ft.)
- (2) 4-gauge ring terminal with shrink tube and logo, pre-terminated on each end of the 2ft. red wire
- (1) 4-gauge ring terminal with shrink tube and logo, pre-terminated on 8ft. red wire
- (1) 4-gauge ring terminal with shrink tube and logo, pre-terminated on yellow wire
- (1) Ignition protected circuit breaker (100-amp)
UPC Code 086429416837
EnrockAudio 16-Gauge Speaker Wire
This 16-gauge speaker wire with spool from EnrockBasics lets you easily connect your speakers to amplifiers or receivers.
Marked Polarity
One side of the wire is marked with a white line, making it quick and easy to distinguish the polarity and get your audio system set up properly.
Easy to Use
The EnrockAudio 16-gauge Speaker Wire comes wrapped around a hard plastic spool that makes dispensing convenient and easy.
Details
Connects audio speakers to your A/V receiver or amplifier no distortion. The plastic jacket around the speaker wire helps to deliver high-quality undistorted signals to and from all of your audio equipment.
General Features:
- 50 Feet of 16-gauge speaker wire.
- Connects audio speakers to your A/V receiver or amplifier.
UPC Code 799861390381
4- Piece Car Door Trim Panel Dash Stereo Radio Installer Removal Pry Tools Plastic
Easily remove Trim, Molding, Door panels and Dashboards Great for automotive snap on trim panel and molding removal Also works great for furniture repair soft and hard woods, antiques restorations, upholstery, leather work etc Rugged durable plastic construction prevents marring Works on interior and exterior trim.
4- Piece Car Door Trim Panel Dash Stereo Radio Installer Removal Pry Tools Plastic Tool Set
- Unique design allows access under trim to remove piece correctly--at the fastener point.
- Versatile tool set that pays for itself with just one use; saves time and frustration.
- Professional-grade kit of 4 incredibly useful tools for removing auto body trim and molding.
- Easily remove Trim, Molding, Door panels and Dashboards.
- Works on interior and exterior trim, wide edge remover, narrow edge remover, pull-type remover, handle remover and upholstery clip remover.
UPC Code 840440918233

