Infinity Bluetooth FM Radio Receiver, 6x9" 300W Max Car Speakers (Pair), Wire
The Infinity Alpha 100 is an easily mounted single DIN car receiver featuring a detachable face, FM radio, a USB and SD card reader to access your music files, built in Bluetooth for hands free calling mode and streaming music from a connected device. The multimedia system provides 50W x 4 of power to give you the sound you crave and includes an AUX input.
General Features:
- Single DIN Receiver
- Bluetooth Audio Mode and Hands Free Calling
- FM Radio Tuner
- Playback from USB drives and SD memory cards
- AUX input
- Recommended Speaker Impedance: 4 Ohms
- Frequency Response: 20 Hz - 20 kHz
- Rated Output Power: 4 x 50W Peak
- Signal to Noise Ratio: 70dB
- Detachable Face
- 10A Fuse Rating
- Power Supply: 12V DC On-Board Network
UPC Code 050667378639
Designed to fit into 6"x9" factory locations without vehicle modification, the GX9638 delivers high-energy JBL pro sound for in vehicle applications. Leveraging our patented Plus One woofer cone with three Ohm voice coil and edge-driven soft-dome tweeter mounted into our all new proprietary tweeter deflector, all individually voiced to deliver authentic JBL pro sound for your next roadtrip. To ensure that you get a great performance even with the windows down, the three ohm voice coil extracts more power from the amplifier, delivering high output and deeper bass.
Features
Plus One Woofer Cones:
HARMAN’s patented Plus One polypropylene cones provide more overall speaker-cone area than other cones in its class. The result is higher sensitivity, increased low-frequency output and greater overall performance.
Edge-Driven Soft Dome Tweeter:
Edge-driven dome tweeters provide better power handling than balanced-dome tweeters by providing more heat-dissipating surface area in the voice coil. Harman uses larger tweeter diaphragms because they always know where the listeners will sit in a car. It’s not like in a house, where many listening positions must be accommodated.
Three-ohm DCR Voice Coils:
Low-Impedance, three ohm voice coils compensate for the undergauged speaker wiring found in many of today’s cars, and make the most of every watt your amplifier or head unit can deliver.
Individually Voiced:
For most brands, off-the-shelf speakers and a cursory approval of frequency response curves are good enough. That’s not the case with JBL. JBL doesn't only listen to the speakers against the competition – JBL voices them against each other to ensure each line has the consistent JBL sound signature that’s known and sought out by those who care about their audio. This is just part of an extensive development process undertaken by some of the best transducer
engineers in the world to provide the finest listening experience at any price point.
General Features:
- Power Handling: 100W RMS, 300W Peak
- Frequency Response: 45Hz – 21kHz
- Impedance: 2.3 ohms
- Sensitivity (@ 2.83V/m): 94dB
- Edge-Driven Soft Dome Tweeter
- Plus One Woofer Cones
- 3-Ohm DCR Voice Coil
- Individually Voiced
- Supertweeter
What's In The Box:
- 2x Speakers
- 1x Gasket Foam
UPC Code 050036356992
EnrockAudio 16-Gauge Speaker Wire
This 16-gauge speaker wire with spool from EnrockBasics lets you easily connect your speakers to amplifiers or receivers.
Marked Polarity
One side of the wire is marked with a white line, making it quick and easy to distinguish the polarity and get your audio system set up properly.
Easy to Use
The EnrockAudio 16-gauge Speaker Wire comes wrapped around a hard plastic spool that makes dispensing convenient and easy.
Details
Connects audio speakers to your A/V receiver or amplifier no distortion. The plastic jacket around the speaker wire helps to deliver high-quality undistorted signals to and from all of your audio equipment.
General Features:
- 50 Feet of 16-gauge speaker wire.
- Connects audio speakers to your A/V receiver or amplifier.
UPC Code 799861390381