2x Kicker 43DSC6504 6.5" 240W Speakers, 2x 6x9" Speakers, Amplifier w/ Harness
Use to add an amp or use with AXDSPX-WR. Add an amp harness 1998-2013 HD with OE radio and fairing. Pre-wire for the AXDSPX-WR, input and output harnesses included. Provides pre-terminated input and output wires. RCA output harnesses included. Pre-wired rear speaker plug, used with BC-9720 backbone harness. Universal for all amps on the market. Wire covered in protective cloth tape.
DSP Amp Harness:
- Use to add an amp or use with AXDSPX-WR
- Add an amp harness 1998-2013 HD with OE radio and fairing
- Pre-wire for the AXDSPX-WR, input and output harnesses included
- Provides pre-terminated input and output wires
- RCA output harnesses included
- Pre-wired rear speaker plug, used with BC-9720 backbone harness
- Universal for all amps on the market
- Wire covered in protective cloth tape
UPC Code 086429407880
Big sound meets big value. Use this flexible two-channel KM-Series Marine amplifier to power your system like only KICKER can! Using Class A/B power, this amp features a variable bass boost with KickEQ giving you as much as 6dB of extra bump. A powerful 12dB crossover is also included, letting you quickly tune your system to perfection.
General Features:
- Class A/B
- 190 Watts of Dynamic Power
- Stereo Amplifier with Bridging Capability
- Conformal-Coated Circuit Board
- Variable 12dB Crossover
- KickEQ Variable 6dB Bass Boost
- Real Marine ABYC/NMMA-Compliant Power Connections
- 316L Stainless-Steel Hardware Included
- POWER [watts/ch], 2 OHM STEREOL: 75 x 2
- POWER [watts/ch], 4 OHM STEREO: 40 x 2
- POWER [watts/ch], 4 OHM BRIDGED MONO: 150 x 1
- FREQUENCY RESPONSE [Hz]: 10-20k, +0/-1dB
- INPUT SENSITIVITY: High Level 250mV-10V, Low Level 125mV-5V
- SIGNAL-TO-NOISE RATIO: >95dB, a-weighted, re: rated power
- ACTIVE CROSSOVER: 12dB/octave, variable 50-200Hz, selectable high pass, low pass or all pass
- KickEQ BOOST: Variable 0-6dB, centered @ 40Hz
UPC Code 713034020363
The DSC6504 6-1/2-Inch Coaxial Speakers are the ideal upgrade for your car doors. Using zero protrusion PEI tweeters ensures you get every bit of clarity you need, without interfering with factory grilles. A stamped steel framework supports a ribbed, UV-treated foam surround and rigid polypropylene cone with EVCTM (Extended Voice Coil) technology, for the best sonic quality.
These speakers will handle 60 watts RMS and 240
Watts Max per speaker. They include 1/2" tweeters to really hit those
high notes with stiff polypropylene cones to hit low bass notes as low
at 40 Hz. These speakers are a drop-in coaxial upgrade with the
flexibility to fit nearly any vehicles doors for a vast improvement over
factory sound.
General Features:
- Power Handling: Peak: 240 watts
- Recommended Power Range: 6 - 60 watts RMS per channel.
- Rigid polypropylene cone material.
- Polyester foam speaker surround.
- Stamped steel basket.
- EVC (Extended Voice Coil) technology, for excellent sound.
- 1/2" zero protrusion polyetherimide tweeter.
- Neodymium tweeter magnet.
- PEI (polyether imide) balanced dome tweeter.
- Top-mount Depth: 1-13/16"
- 4 ohms impedance.
- Frequency Response: 40 - 20,000 Hz.
- Sensitivity: 90dB.
- Grilles included.
UPC Code 713034077671
The Kicker 43DSC69304 6x9" 3-way car audio speakers features a MAX power of 360 watts and an RMS power of 70 watts. A drop-in coaxial upgrade with the flexibility to fit nearly any vehicles doors for a vast improvement over factory sound. Also, the thin-profile woofers avoid obstructing car-window mechanisms and the 13mm polyethylene-naphthalate domed tweeters have zero-to-minimal tweeter protrusion. The high-sensitivity motor structures of the woofers are made to deliver increased volume output despite lower-powered, factory head units, but they also handle the high power from add-on amps. The midrange woofer's stiff, polypropylene cones and acoustic-foam surrounds provide optimal performance.
General Features:
- 6x9" 2016 DS Series 3-Way Car Speakers.
- Power Handling: Peak: 360 watts / RMS: 180 watts per pair.
- Recommended Power Range: 6 - 90 watts RMS per channel.
- 2" zero protrusion midrange woofer.
- Rigid polypropylene cone material.
- Polyester foam speaker surround.
- Stamped steel basket.
- EVC (Extended Voice Coil) technology.
- 1/2" zero protrusion polyetherimide balanced dome tweeter.
- Neodymium Tweeter magnet.
- Grilles included.
- Top-mount Depth: 3.25"
- Cutout Dimensions: 5.625 x 8.4375"
- 4 ohms impedance.
- Frequency Response: 30 - 20,000 Hz
- Sensitivity: 92dB.
UPC Code 713034077701
Metra Saddlebag Replacement Lids are designed with 6”x9” speaker adapters under the lid for correct 6”x9” fitment, and provide a better fit than any others on the market. They have metal mesh speaker grilles and are finished in gloss black and can go from package to bike. They can also be painted.
Features:
- One pair of bag lids with 6"x9" speaker adapters
- Metal mesh speaker grilles
- Factory latch assembly transfers to the new bag lid
- Additional hardware, rubber gaskets, and cloth tether restraints included
- Fits models with Saddlebags
UPC Code 086429358144
Power your marine amplifier with a wiring kit that can withstand the harsh environment and still deliver full sound performance. Fully tinned wiring ensures that these amp kits won’t corrode or oxidize and turn green after a season on the water. Oxygen-free copper provides a reliable connection with maximum conductivity. By using 100% virgin copper the tin won’t flake off, something commonly seen when using recycled copper materials. While it is also common to tin just the tips of the wire for cost savings, this practice does not actually provide any benefits. Metra’s amp kits use fully tinned copper wire from top to bottom that can withstand a harsh marine environment and salty air. The ignition-protected 50-amp circuit breaker is IP67 rated with stainless steel connection points for corrosion resistance
Amplifier Wiring Kit:
- Marine compliant amplifier wiring kit
- Fully tinned 100% virgin copper wire
- BC5W2 marine compliant jacket
- 50-amp marine circuit breaker is rated IP67 with stainless steel connection points for corrosion resistance
- Easy to solder tinned wiring
- Connectors, ring terminals, and wire ties included
What’s in the box:
- (1) 8-gauge tinned oxygen-free copper side-by-side red power and yellow ground wire (10ft.)
- (1) 18-gauge tinned oxygen-free copper blue remote turn-on wire (18ft.)
- (2) 8-gauge ring terminal with shrink tube and logo, pre-terminated on each end of the 2ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on 8ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on yellow wire
- (1) Ignition protected circuit breaker (50-amp)
UPC Code 086429416820
This durable, quick disconnect allows for convenient, safe installation and servicing of amps, active subwoofers, or removable winches in powersport and marine applications. This product is designed for use in the harshest environments, unlike standard audio equipment that is not suited for off-road applications. This important part of your installation can resist the elements to keep the system working great throughout all of your rugged outdoor adventures.
Power Block:
- 2.5” W x 2” L x 2.25” D
- Accepts 4 AWG power and ground
- Remote turn-on lead
- Machined brass block
- Has rubber boot to protect from the elements
UPC Code 086429430413
Enrocks EORA102 is a universal AM/FM antenna that is easy to hide in your motorcycle, automobile, truck, and even boat! Just hide it anywhere. Simply hook up, peel, and stick. Will stick on to glass, roof, headliner, inside the camper, mounts to any surface.
General Features:
- Electronic Stereo Radio Hidden Amplified Antenna Kit
- Hidden Amplified Antenna Design for Direct Replacement
- Covering all AM / FM Broadcast Radio
- Input: Thoroughfare / Output Impedance: 750HM
- Dimension: 3.75" X 1" X 0.75"
Installation Instructions
- Connect Antenna Plug of this unit to Car Radio Antenna Socket
- Connect Black 12v positive to accessories
- Secure Antenna to clean flat surface
- Connect Silver wire to good ground
- If extra gain/pickup is required, connect the red wire to positive side of rear window demister. (this connection is optional)
UPC Code 728120484479
A ground-breaking virgin-PVC, Hyper-Flex insulation and multi-strand construction allows you to bend, twist, and contort the cable in any way imaginable for an ultimate installation experience while delivering maximum current flow; remains ultra-flexible under hot or cold temperature extremes; transfers the cleanest audio signal possible by using tightly twisted, silver-tinned OFC copper conductors; zip line to easily remove outer insulation.
Speaker Wire:
- 20 Feet
- 16 Gauge
- Silver-tinned OFC (oxygen-free copper)
UPC Code 632016086404
