2x JVC CS-DR621 6.5" 300W Speakers, 2x 6x9" 500W Speakers, Amp w/ Touring Audio
Use to add an amp or use with AXDSPX-WR. Add an amp harness 1998-2013 HD with OE radio and fairing. Pre-wire for the AXDSPX-WR, input and output harnesses included. Provides pre-terminated input and output wires. RCA output harnesses included. Pre-wired rear speaker plug, used with BC-9720 backbone harness. Universal for all amps on the market. Wire covered in protective cloth tape.
DSP Amp Harness:
- Use to add an amp or use with AXDSPX-WR
- Add an amp harness 1998-2013 HD with OE radio and fairing
- Pre-wire for the AXDSPX-WR, input and output harnesses included
- Provides pre-terminated input and output wires
- RCA output harnesses included
- Pre-wired rear speaker plug, used with BC-9720 backbone harness
- Universal for all amps on the market
- Wire covered in protective cloth tape
UPC Code 086429407880
The JBL Apex PA454 weather-resistant 4-channel multi-application Class D amplifier features an ultra-compact aluminum chassis and small footprint design to allow for versatile installation. The Apex Series PA454 powersports amplifier delivers efficient Class D power and is designed to fit into tight spaces and withstand outdoor environments without missing a beat. Available with 4-channels of output power, the Apex Series PA454 includes selectable front/rear electronic crossover frequency adjustment for quick and easy installation.
General Features:
- Ultra-Compact Aluminum Chassis
- Conformal Coated PCB
- Big Dynamic Power
- Full-Range Outputs and Selectable Crossovers
- High and low level Inputs
- Max Power: 450W peak
- RMS Power Output @ 4O: 45W x 4, <1% THD+N
- Selectable hi-pass filter: off, 60-, 80-, 120Hz @ 12dB/octave
- Frequency Response: 20Hz – 20kHz
- Signal-to-Noise Ratio: >75dB (ref 1W output @ 4O)
- Fuse rating: 15A
UPC Code 050036359092
JVC's CS-DR621 6.5" 2-way speakers are the affordable solution. Built to weather the extreme temperatures of life in your car doors, these slim-profile speakers offer strong audio performance with good power handling. These speakers features lightweight yet durable carbon mica woofer cone for smooth, consistent performance, along with a 1" balanced Poly-Ether Imide tweeter that'll increase your music's clarity. These speakers will give you a solid boost in sound quality, even when powered by your factory radio. Combines High output sound and toughness to withstand the powerful drive.
General Features:
- 2-Way Coaxial Design
- 300W Peak Power Handling
- 50W RMS Power Handling
- Impedance: 4 Ohms
- Sound Pressure Level - 89 dB
- Frequency Response - 85-23,800Hz
- Carbon Mica Cone
- Wide Opening Grill
- Hybrid Surround
- Small-Design Tweeter Cover
- Balanced Poly-Ether Imide Tweeter
- Ferrite Magnet
- Neodymium Tweeter Magnet
- Poly-Ether Imide Diaphragm
UPC Code 046838079764
JVC CSDR693 drvn DR Series 6x9" 3-way car speakers feature a horn ring sound enhancer, which improves mid-high frequency sound character, full cover grill design protects the woofer and tweeter in open installations, Lightweight PP + Mica Cone Material provides highly responsive, clear and undistorted sound. Works best at 70 Watts (500W Max) of recommended power.
General Features:
- 6"x9" Speakers
- PP+ Mica Cone
- Full Cover Grill Design
- Horn Ring Sound Enhancer
- Frequency Response: 54-18,000Hz
- Power Handling Capacity (RMS): 70W
- Power Handling Capacity (Peak Power): 500W
- Impedance: 4 ohms
- Sound Pressure Level: 86 dB
- Diaphragm: PP
- Surround: Cloth
- Magnet: Ferrite
UPC Code 046838079221
Metra Saddlebag Replacement Lids are designed with 6”x9” speaker adapters under the lid for correct 6”x9” fitment, and provide a better fit than any others on the market. They have metal mesh speaker grilles and are finished in gloss black and can go from package to bike. They can also be painted.
Features:
- One pair of bag lids with 6"x9" speaker adapters
- Metal mesh speaker grilles
- Factory latch assembly transfers to the new bag lid
- Additional hardware, rubber gaskets, and cloth tether restraints included
- Fits models with Saddlebags
UPC Code 086429358144
Power your marine amplifier with a wiring kit that can withstand the harsh environment and still deliver full sound performance. Fully tinned wiring ensures that these amp kits won’t corrode or oxidize and turn green after a season on the water. Oxygen-free copper provides a reliable connection with maximum conductivity. By using 100% virgin copper the tin won’t flake off, something commonly seen when using recycled copper materials. While it is also common to tin just the tips of the wire for cost savings, this practice does not actually provide any benefits. Metra’s amp kits use fully tinned copper wire from top to bottom that can withstand a harsh marine environment and salty air. The ignition-protected 50-amp circuit breaker is IP67 rated with stainless steel connection points for corrosion resistance
Amplifier Wiring Kit:
- Marine compliant amplifier wiring kit
- Fully tinned 100% virgin copper wire
- BC5W2 marine compliant jacket
- 50-amp marine circuit breaker is rated IP67 with stainless steel connection points for corrosion resistance
- Easy to solder tinned wiring
- Connectors, ring terminals, and wire ties included
What’s in the box:
- (1) 8-gauge tinned oxygen-free copper side-by-side red power and yellow ground wire (10ft.)
- (1) 18-gauge tinned oxygen-free copper blue remote turn-on wire (18ft.)
- (2) 8-gauge ring terminal with shrink tube and logo, pre-terminated on each end of the 2ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on 8ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on yellow wire
- (1) Ignition protected circuit breaker (50-amp)
UPC Code 086429416820
This durable, quick disconnect allows for convenient, safe installation and servicing of amps, active subwoofers, or removable winches in powersport and marine applications. This product is designed for use in the harshest environments, unlike standard audio equipment that is not suited for off-road applications. This important part of your installation can resist the elements to keep the system working great throughout all of your rugged outdoor adventures.
Power Block:
- 2.5” W x 2” L x 2.25” D
- Accepts 4 AWG power and ground
- Remote turn-on lead
- Machined brass block
- Has rubber boot to protect from the elements
UPC Code 086429430413
Enrocks EORA102 is a universal AM/FM antenna that is easy to hide in your motorcycle, automobile, truck, and even boat! Just hide it anywhere. Simply hook up, peel, and stick. Will stick on to glass, roof, headliner, inside the camper, mounts to any surface.
General Features:
- Electronic Stereo Radio Hidden Amplified Antenna Kit
- Hidden Amplified Antenna Design for Direct Replacement
- Covering all AM / FM Broadcast Radio
- Input: Thoroughfare / Output Impedance: 750HM
- Dimension: 3.75" X 1" X 0.75"
Installation Instructions
- Connect Antenna Plug of this unit to Car Radio Antenna Socket
- Connect Black 12v positive to accessories
- Secure Antenna to clean flat surface
- Connect Silver wire to good ground
- If extra gain/pickup is required, connect the red wire to positive side of rear window demister. (this connection is optional)
UPC Code 728120484479
A ground-breaking virgin-PVC, Hyper-Flex insulation and multi-strand construction allows you to bend, twist, and contort the cable in any way imaginable for an ultimate installation experience while delivering maximum current flow; remains ultra-flexible under hot or cold temperature extremes; transfers the cleanest audio signal possible by using tightly twisted, silver-tinned OFC copper conductors; zip line to easily remove outer insulation.
Speaker Wire:
- 20 Feet
- 16 Gauge
- Silver-tinned OFC (oxygen-free copper)
UPC Code 632016086404
