Complete Marine Audio Package: INFR3000 Receiver, 4x 6.5" Speaker, Sub, Antenna
This Infinity WAKE Series digital media receiver features a host of cool media options, all under a compact, marine-grade design that can withstand the open-environment. This receiver comes packed with AM/FM radio, WB Radio, USB/AUX inputs, and built-in Bluetooth capability. This receiver system also has a pair of preamp outputs in case you want to expand your marine audio system with an amplifier or a powered subwoofer!
General Features:
- Marine Digital Media Receiver (Does not Play CDs)
- Built-In Amp (20Wx4 RMS, 55Wx4 Peak)
- 4" Black and White LCD Screen
- Built-In Bluetooth Capability
- AM/FM/Weatherband Tuner
- IPX7-Rated Water-tight Front Panel
- Rear AUX/USB Inputs
- 2 Channel Preamp Outputs
UPC Code 648701663003
JBL Stage Marine Speakers are ready to take on your next outdoor adventure. These fully marinized speakers not only deliver JBL sound, but they bring the sound to life. Engineered to withstand sun, salt, sea spray and wash downs, they feature sealed motor structure, UV resistant one-piece cast-polymer baskets and rubber surrounds. The polypropyelene cone and balanced dome tweeter provide great bass, smooth highs and lots of output to ensure every note can be heard loud and clear.
General Features:
- 6-1/2" (160mm) Marine Two-way Speaker with 1/2" (13mm) tweeter
- Power Handling: 60W rms, 180W peak
- Sensitivity (@ 2.83V): 90dB
- Frequency Response: 60Hz – 20kHz
- Nominal Impedance: 4 ohms
- IPx5 Rated
- Grille Mounted Tweeters
- Polymer Basket
- Individually Voiced
- Harman Standard Reliability Tested
- Bulk Packaging
UPC Code
The Milennia PLATEWAKE1 is a single DIN Retrofit Adaptor Plate for the the wake series INF-R3000 or JBL-R3500.
GENERAL FEATURES:
- This plate allows either the INF-R3000 or JBL-R3500
- Single DIN
- Black;
- MIL-PLATEWAKE: 8 5/8"W x 3 3/8"H
- Single din=2"x7" rectangular cutout
UPC Code 782926501594
The JBL Marine A5055 5-channel amplifier delivers 760 Watts RMS using a Class AB+D amplifier design to ensure high output. The subwoofer channel features a low-pass crossover, selectable bass boost, and phase switch to optimize subwoofer performance. Includes a wired Remote Bass Control for volume adjustment (16.5 feet long).
General Features:
- 5 channel Marine amplifier
- 50 watts RMS x 4 + 320 watts RMS x 1 at 4 ohms
- 75 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms
- 100 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms
- Variable high- and low-pass filters (32-320 Hz, 12 dB/octave) on front and rear channels
- Low-pass filter (32-320 Hz, 12 dB/octave) on subwoofer channel
- Bass boost on subwoofer channel (0-12dB at 45Hz)
- Phase switch on subwoofer channel (0, 180 degrees)
- Preamp and speaker-level inputs
- Fuse rating: 30A x 3
- 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
- WxHxD=360mm x 51.3mm x 180mm
- WxHxD=14-3/16” x 2-1/16” x7-1/8”
UPC Code 050036396950
Stay Clear, Get Loud, Go Deep
JBL's Stadium Marine loudspeakers leverage JBL’s world class audio engineering and music reproduction with purpose-built marine loudspeakers that will survive the rigors of the harsh marine environment. Choose from the most popular sizes for boats and watercraft. The 6-1/2" coaxial, 8" three-way convertible speaker system and 10" woofer have Plus One™ polypropylene woofer and midrange cones, Mylar tweeter domes (Except Subwoofer), one piece cast polymer baskets, sealed magnets, and rubber woofer surrounds for high SPL performance.
Wind, water or engine noise will not drown them out. Speakers are UV resistant in a marine grade IPX3 (IPX5 from front) weather resistant and include RGB perimeter illumination and go through 300 hours of salt spray testing. And they're ready to make amazing music on the water. Whether it's a daily scrub down, a picnic in a quiet cove or an all-out race across high swells, JBL has the right configuration for your craft.
General Specifications
- Power Handling 300 watts RMS, 900 watts peak power
- Sensitivity 89dB at 2.83 volts
- Frequency Response 20 - 2KHz
- Voice Coil Diameter 2 in. (49.5mm)
- Impedance 2 and 4-ohms, Switch Selectable Impedance (SSI™)
What's in The Box?
- 1 x 10" (250mm), ea., with integrated grille
- 6 x Screw
- 6 x Speed clip
- 1 x Spanner
- 1 x Closed cell foam gasket
- 1 x LED cable
- 2 x JBL logo badge (Grey)
- 2 x JBL logo badge (Orange)
- 1 x Owner's manual
- 1 x RoHS sheet
UPC Code
This rugged Enrock EKMR1 marine soft wire universal antenna gives you performance, durability and plenty of placement options. The flexible wire makes it the perfect hideaway antenna, while the corrosion-resistant rubber exterior confirms that it will stand up to salt and spray. The 22inch long flexible wire will make mounting it a breeze.
Radio Antenna:
- 22" AM/FM Marine Antenna
- Improves Radio reception
UPC Code 799861388630
Power your marine amplifier with a wiring kit that can withstand the harsh environment and still deliver full sound performance. Fully tinned wiring ensures that these amp kits won’t corrode or oxidize and turn green after a season on the water. Oxygen-free copper provides a reliable connection with maximum conductivity. By using 100% virgin copper the tin won’t flake off, something commonly seen when using recycled copper materials. While it is also common to tin just the tips of the wire for cost savings, this practice does not actually provide any benefits. Metra’s amp kits use fully tinned copper wire from top to bottom that can withstand a harsh marine environment and salty air. The ignition-protected 50-amp circuit breaker is IP67 rated with stainless steel connection points for corrosion resistance
Amplifier Wiring Kit:
- Marine compliant amplifier wiring kit
- Fully tinned 100% virgin copper wire
- BC5W2 marine compliant jacket
- 50-amp marine circuit breaker is rated IP67 with stainless steel connection points for corrosion resistance
- Easy to solder tinned wiring
- Connectors, ring terminals, and wire ties included
What’s in the box:
- (1) 8-gauge tinned oxygen-free copper side-by-side red power and yellow ground wire (10ft.)
- (1) 18-gauge tinned oxygen-free copper blue remote turn-on wire (18ft.)
- (2) 8-gauge ring terminal with shrink tube and logo, pre-terminated on each end of the 2ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on 8ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on yellow wire
- (1) Ignition protected circuit breaker (50-amp)
UPC Code 086429416820
