INFR3000 4" LCD screen Receiver, 4x 8" Boat Speaker, 4-Channel Compact Amplifier
This Infinity WAKE Series digital media receiver features a host of cool media options, all under a compact, marine-grade design that can withstand the open-environment. This receiver comes packed with AM/FM radio, WB Radio, USB/AUX inputs, and built-in Bluetooth capability. This receiver system also has a pair of preamp outputs in case you want to expand your marine audio system with an amplifier or a powered subwoofer!
General Features:
- Marine Digital Media Receiver (Does not Play CDs)
- Built-In Amp (20Wx4 RMS, 55Wx4 Peak)
- 4" Black and White LCD Screen
- Built-In Bluetooth Capability
- AM/FM/Weatherband Tuner
- IPX7-Rated Water-tight Front Panel
- Rear AUX/USB Inputs
- 2 Channel Preamp Outputs
UPC Code 648701663003
JBL Club Marine OEM Replacement Speakers are ready for your next outdoor adventure. These fully marinized speakers not only deliver JBL sound, they also provide RGB lighting to bring the sound to life. Engineered to withstand sun, salt, sea spray and wash downs, they feature sealed motor structures, UV resistant one-piece cast-polymer baskets, a sealed magnet and rubber surrounds.
The polypropyelene cone and balanced silk dome tweeter provide great bass, smooth highs and lots of output to ensure every note can be heard loud and clear. With two grille colors included in the box, you can easily match your speaker grilles with your boat.
Club Marine 8" Two-Way Speaker
- Power Handling: 150Wrms, 450W peak
- Sensitivity (@ 2.83V): 92dB
- Frequency Response: 30Hz – 20kHz
- Nominal Impedance: 4ohm
- 2x Full-Range OEM Replacement Speakers
- 2x Speaker Grilles, Gloss White
- 2x Speaker Grilles, Satin Grey
- Stainless steel mounting hardware
- Drill bit for easy installation
- Foam gasket
- 2x Speaker Pigtail Harness
- 2x RGB Pigtail Harness
- 2x JBL sticker
- Quick Start Guide
UPC Code
The Milennia PLATEWAKE1 is a single DIN Retrofit Adaptor Plate for the the wake series INF-R3000 or JBL-R3500.
GENERAL FEATURES:
- This plate allows either the INF-R3000 or JBL-R3500
- Single DIN
- Black;
- MIL-PLATEWAKE: 8 5/8"W x 3 3/8"H
- Single din=2"x7" rectangular cutout
UPC Code 782926501594
Infinity M704A 4-Channel amplifier features selectable all high or low-pass crossovers with variable electronic frequency adjustment for precision system tuning. Engineered for harsh marine conditions with power and performance to meet the needs of any outdoor audio system. Max Power - 1000 Watts Peak
Amplifier:
- 4 Channel Marine Amplifier
- Class D Technology
- Max Power - 1000W Peak
- Power Output, 2Ω - 100W RMS x 4
- Power Output, 4Ω - 70W RMS x 4
- Power Output, 4Ω Bridged - 200W RMS x 2
- Signal-to-Noise Ratio - ≥85dB
- High and low level inputs
- Variable crossovers and bass boost
UPC Code 050667372729
This rugged Enrock EKMR1 marine soft wire universal antenna gives you performance, durability and plenty of placement options. The flexible wire makes it the perfect hideaway antenna, while the corrosion-resistant rubber exterior confirms that it will stand up to salt and spray. The 22inch long flexible wire will make mounting it a breeze.
Radio Antenna:
- 22" AM/FM Marine Antenna
- Improves Radio reception
UPC Code 799861388630
Power your marine amplifier with a wiring kit that can withstand the harsh environment and still deliver full sound performance. Fully tinned wiring ensures that these amp kits won’t corrode or oxidize and turn green after a season on the water. Oxygen-free copper provides a reliable connection with maximum conductivity. By using 100% virgin copper the tin won’t flake off, something commonly seen when using recycled copper materials. While it is also common to tin just the tips of the wire for cost savings, this practice does not actually provide any benefits. Metra’s amp kits use fully tinned copper wire from top to bottom that can withstand a harsh marine environment and salty air. The ignition-protected 50-amp circuit breaker is IP67 rated with stainless steel connection points for corrosion resistance
Amplifier Wiring Kit:
- Marine compliant amplifier wiring kit
- Fully tinned 100% virgin copper wire
- BC5W2 marine compliant jacket
- 50-amp marine circuit breaker is rated IP67 with stainless steel connection points for corrosion resistance
- Easy to solder tinned wiring
- Connectors, ring terminals, and wire ties included
What’s in the box:
- (1) 8-gauge tinned oxygen-free copper side-by-side red power and yellow ground wire (10ft.)
- (1) 18-gauge tinned oxygen-free copper blue remote turn-on wire (18ft.)
- (2) 8-gauge ring terminal with shrink tube and logo, pre-terminated on each end of the 2ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on 8ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on yellow wire
- (1) Ignition protected circuit breaker (50-amp)
UPC Code 086429416820
