JBL JAM5000N Marine LCD Receiver, 8x 6.5" 300W Speakers, 2x Subwoofer, Amplifier
The JAM5000N incorporates built-in Bluetooth 5.3, enabling wireless audio playback (A2DP) and control (AVRCP) from Bluetooth-enabled devices. This feature allows users to stream music, audio apps, and other content from their Bluetooth-enabled smartphones or tablets to the marine digital media receiver.
Basic playback functions, such as Play/Pause and Previous/Next Track, can be controlled directly from the front panel. Additionally, song, artist, and album information (excluding album art) is displayed on the front panel.
General Features:
- Maximum Power : 55 Watts
- RMS Power Output : 25 Watts
- Bluetooth : Yes
- Aux Input : Yes
- MP3 Playback : Yes
- WMA Playback : Yes
- Rear USB Input : 1
- Preamp Outputs : 4
- Color : Black
UPC Code 050036399449
JBL's Stadium Marine loudspeakers leverage JBL’s world class audio engineering and music reproduction with purpose-built marine loudspeakers that will survive the rigors of the harsh marine environment. Choose from the most popular sizes for boats and watercraft. The 6.5" coaxial, 8" three-way convertible speaker system and 10" woofer have Plus One polypropylene woofer and midrange cones, Mylar tweeter domes (Except Subwoofer), one piece cast polymer baskets, sealed magnets, and rubber woofer surrounds for high SPL performance. Wind, water or engine noise will not drown them out. Speakers are UV resistant in a marine grade IPX3 (IPX5 from front) weather resistant and include RGB perimeter illumination and go through 300 hours of salt spray testing. And they're ready to make amazing music on the water. Whether it's a daily scrub down, a picnic in a quiet cove or an all-out race across high swells, JBL has the right configuration for your craft.
General Features:
- 6.5" Marine 2-Way Speakers
- Power Handling: 100 Watt RMS
- Power Handling: 300 Watt Peak
- Sensitivity: 92dB
- Frequency Response: 40 - 25kHz
- Impedance: 2 or 4 Ohm
- Perimeter RGB LED Illumination - 7 colors
- Marine-grade IPX3 (IPX5 from the front)
- Mylar Tweeters with Integrated Grilles
- One-piece Polymer basket
UPC Code
This 10" marine subwoofer delivers powerful bass with 300W RMS (900W peak) and features multi-color RGB LED lights for stylish flair. Built with a durable Plus One polypropylene cone and one-piece cast polymer basket, it's IPX5 water-resistant and perfect for marine use. Switchable 2- or 4-ohm impedance, 20–2000 Hz frequency response, and 89 dB sensitivity ensure versatile, high-performance sound.
General Features:
- 10" marine subwoofer
- multi-color RGB LED lights
- Plus One polypropylene cone
- one-piece cast polymer basket
- IPX5 rated for water resistance
Specifications:
- power handling: 300 watts RMS (900 peak)
- impedance: switchable 2- or 4-ohm
- frequency response: 20-2000 Hz
- sensitivity: 89 dB at 2.83V
What's in the box:
- One marine subwoofer with fixed gray polymer grille
- 6" LED Harness
- Six 1-3/8" Stainless-steel screws (3mm Allen head)
- 6 Stainless-steel speed clips
- 3mm Allen head bit
- Adhesive backed foam gasket
- 1 Black JBL logo grille badge
- 1 Orange JBL logo grille badge
- Owner's manual (English/ French/ Spanish/ Russian)
- 2 JBL Stickers
UPC Code 050036384971
The JBL Marine A5055 5-channel amplifier delivers 760 Watts RMS using a Class AB+D amplifier design to ensure high output. The subwoofer channel features a low-pass crossover, selectable bass boost, and phase switch to optimize subwoofer performance. Includes a wired Remote Bass Control for volume adjustment (16.5 feet long).
General Features:
- 5 channel Marine amplifier
- 50 watts RMS x 4 + 320 watts RMS x 1 at 4 ohms
- 75 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms
- 100 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms
- Variable high- and low-pass filters (32-320 Hz, 12 dB/octave) on front and rear channels
- Low-pass filter (32-320 Hz, 12 dB/octave) on subwoofer channel
- Bass boost on subwoofer channel (0-12dB at 45Hz)
- Phase switch on subwoofer channel (0, 180 degrees)
- Preamp and speaker-level inputs
- Fuse rating: 30A x 3
- 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
- WxHxD=360mm x 51.3mm x 180mm
- WxHxD=14-3/16” x 2-1/16” x7-1/8”
UPC Code 050036396950
The Audiopipe signal splitter (SPLIT3003RCA) accepts 3 RCA inputs from a head unit: Front, Rear, and Subwoofer. Provides 3 amplified outputs for each input: 3 front outputs, 3 rear outputs, and 3 subwoofer outputs.
SPLIT-3003RCA AUDIO SIGNAL SPLITTER FEATURES:
- INPUT IMPEDANCE: 47K Ohms
- INPUT SENSITIVITY: 260mV
- S/N RATIO: >95dB -
- OUTPUT LEVEL (10KHz): >1V (1KHz)
- OUTPUT IMPEDANCE: 1K Ohms
- CHANNEL RESOLUTION: >60dB
- HARMONICS DISTORTION: 0.009%
- FREQUENCY RESPONCE: 20-20KHz -
- OUTPUT GAIN: 12Db
UPC Code 784644417706
The Universal USB/3.5mm Auxiliary Interface Mount and Cable measures 10 feet in length and will convert your AUX inputs to USB.
AUX/USB Adaptor:
- USB to RCA pass-through extension cable
- Cable Length: 3m (10ft)
UPC Code 799861390145
The Power Sport Motorcycle Universal Amplifier Wiring Kit includes the following 6 foot length of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder, 60 amp fuse protected by a black nylon braid, Pre-terminated ring terminals, (2) 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh and 4"x6" hook and loop mounting pad for micro-amplifiers.
Amplifier Wiring Kit:
- Designed tor motorcycles
- 6 feet of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder and 60 amp fuse protected by a black nylon braid
- Pre-terminated ring terminals make connections to the battery simple
- Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh makes upgrading the factory speaker wires or adding new speakers a smart choice
- Upgrading Harmon Kardon System – Two 47-ohm .5 watt resistors to keep the factory radio outputs active
- All the necessary installation hardware is included along wtth a 4 × 6 inch hook and loop mounting pad for micro-amplifiers to hold the amplifier securely in place
UPC Code 086429332267
The Enrock EKMR2 Marine Wire Antenna provides excellent radio reception signals to the audio system on your automobile, watercraft vehicles. The flexible wire makes it the perfect hideaway antenna, while the corrosion-resistant rubber exterior confirms that it will stand up to salt and spray. The 40inch long flexible wire will make mounting it a breeze. Knowledgeable boaters realize that even the most expensive radio will perform poorly with a second rate antenna that saves money up front. A quality antenna is the crux of reliable performance in any marine radio. From the largest seagoing ships to the smallest bass boats, Enrock antennas have held up for years under the worst marine conditions, always performing to their maximum design capabilities.
General Features:
- Weather Resistant
- 40" Braided Cable.
- Full AM/FM reception.
UPC Code 799861388647
