JVC KD-T720BT Single DIN Receiver, 2x 6x9" Speakers, 4x 6.5" Speakers, Amplifier
Take your vehicle's infotainment system to the next level with this JVC KD-T720BT multimedia receiver system! This receiver features an array of features to expand your media possibilities, including CD playback, Built-In Bluetooth, USB/AUX inputs for smartphone connection, and Built-In Amazon Alexa for seamless voice control. With 2 Phones Full-Time Connection you can connect two phones full time via Bluetooth, with secure and simple pairing. Calls to either phone can be received by the push of a key on the receiver. You can even use the remote control app to control the receiver directly from your smartphone!
General Features:
- Single DIN Receiver
- CD Playback
- Built-In Bluetooth
- Built-In Amazon Alexa
- 13-Band EQ
- JVC Remote App Compatibility
- USB 1.5A Charging
- 2 Phones Full Time Connection
- Front USB/AUX Inputs
- AM/FM Tuner
- Maximum Power Output: 50Wx4/50Wx2 +Subwoofer (4 ohms) 50Wx1
UPC Code 046838002885
JVC's CS-DR621 6.5" 2-way speakers are the affordable solution. Built to weather the extreme temperatures of life in your car doors, these slim-profile speakers offer strong audio performance with good power handling. These speakers features lightweight yet durable carbon mica woofer cone for smooth, consistent performance, along with a 1" balanced Poly-Ether Imide tweeter that'll increase your music's clarity. These speakers will give you a solid boost in sound quality, even when powered by your factory radio. Combines High output sound and toughness to withstand the powerful drive.
General Features:
- 2-Way Coaxial Design
- 300W Peak Power Handling
- 50W RMS Power Handling
- Impedance: 4 Ohms
- Sound Pressure Level - 89 dB
- Frequency Response - 85-23,800Hz
- Carbon Mica Cone
- Wide Opening Grill
- Hybrid Surround
- Small-Design Tweeter Cover
- Balanced Poly-Ether Imide Tweeter
- Ferrite Magnet
- Neodymium Tweeter Magnet
- Poly-Ether Imide Diaphragm
UPC Code 046838079764
JVC CSDR6931 drvn DR Series 6x9" 3-way car speakers features a lightweight carbon mica material providing clear and undistorted reproduction, Hybrid Surround Rubber Coated Cloth with increased mobility enables high efficiency, Balanced Neodymim Tweeter provides detailed high range and smooth mid range. Works best at 70 Watts (500W Max) of recommended power.
General Features:
- 6x9" 3-Way Speakers
- Power Handling Capacity (Peak power) - 500 Watts
- Power Handling Capacity (RMS power) - 70 Watts
- Impedance - 4 ohms
- Sound Pressure Level: 88dB
- Frequency Response: 58 - 21,000Hz
- Carbon Mica Cone
- Hybrid Surround
UPC Code 046838079788
The Enrock 8-Gauge Amplifier Installation Kit makes installing your brand new sound system in your car or truck much easier. It includes all of the cables, wires, tubing, ties, grommets and ring terminals that you will need in order to get your new sound system up and running. The car amp install kit works with a wide range of sound systems and car types and it makes the installation process easy.
General Features:
- 20 ft. 8 GA Red Power Cable.
- Competition High Quality Fuse Holder.
- 1/4" Ring Terminal.
- 3 ft. 8 GA Black Ground Cable #10 Ring Terminal.
- 16 ft. 18 GA Blue Turn-On Wire.
- 20 ft. High Performance RCA (TRCA) Interconnect (3) Rubber Grommets.
- 30 ft. Speaker Wire 5/16" Ring Terminal.
- 6 ft. Split Loom Tubing (20) 4" Wire Ties.
UPC Code 728120451105
This JVC marine amplifier is rated waterproof and dustproof. A Drain Tunnel Structure is employed for creating a gap between the amplifier and the installation surface. This prevents saltwater and sand from accumulating on the bottom, increasing corrosion protection. The amplifier mounting section is made of 15/64 inch die-cast material to suppress the amplification of vibration. In addition, the thick heat-transfer sheet was also placed to the substrate and the Aluminum die cast heat sink to suppress the vibration of the substrate. Thicker terminal connection points and increased wire size enables maximum current flow and higher output for better low frequency response and cleaner output. High Quality PMLCAP’s (Polymer Multi-Layer Capacitors) are utilized to lower distortion levels, improving the overall listening experience at higher volumes, while maintaining the integrity of the sound. Magnetic Shielding for the output coils reduce radiated noise, delivering smooth and accurate sound.
General Features:
- Max Power Output: 600W
- Rated Power Output @ Stereo (4Ω): 50W x 4 (20Hz–20kHz, ≤1.0% THD)
- Rated Power Output @ Stereo (2Ω): 75W x 4 (1kHz, ≤1.0% THD)
- Rated Power Output @ Bridged (4Ω): 150W x 2 (1kHz, ≤1.0% THD)
- Speaker Impedance: 4Ω (2Ω to 8Ω allowable)
- Speaker Impedance for Bridged connection: 4Ω to 8Ω allowable
- Frequency response (+0, –3dB): 10Hz–35kHz
- Input Sensitivity (RCA): 0.2V-5.0V
- Signal to noise ratio: 89dB
- Low pass filter frequency (–12dB/oct.): 50Hz–200Hz (variable)
- High pass filter frequency (–12dB/oct.): 50Hz–200Hz (variable)
- Operating voltage: 12V DC car battery
- Current consumption: 26A
- Operational temperature range: –10°C – 60°C
- Dimensions (W × H × D): 7-13/16" x 1-15/16" x 4-1/8"
- Weight: 1.6kg (3.5lbs)
- Waterproof Dustproof Vibrationproof: IP66, IP67
UPC Code 046838001925
