JVC Single-DIN CD Radio, 2x 6.75" Speakers, XM Tuner, Amp, Install Accessories
Take your vehicle's infotainment system to the next level with this JVC KD-T720BT multimedia receiver system! This receiver features an array of features to expand your media possibilities, including CD playback, Built-In Bluetooth, USB/AUX inputs for smartphone connection, and Built-In Amazon Alexa for seamless voice control. With 2 Phones Full-Time Connection you can connect two phones full time via Bluetooth, with secure and simple pairing. Calls to either phone can be received by the push of a key on the receiver. You can even use the remote control app to control the receiver directly from your smartphone!
General Features:
- Single DIN Receiver
- CD Playback
- Built-In Bluetooth
- Built-In Amazon Alexa
- 13-Band EQ
- JVC Remote App Compatibility
- USB 1.5A Charging
- 2 Phones Full Time Connection
- Front USB/AUX Inputs
- AM/FM Tuner
- Maximum Power Output: 50Wx4/50Wx2 +Subwoofer (4 ohms) 50Wx1
UPC Code 046838002885
These CS-Series 6-3/4-inch Coaxial Speakers are the perfect way to upgrade your factory speakers. CS-Series Coaxials deliver remarkable performance and ultra-clean bass with a heavy-duty motor/magnet structure not found in stock speakers. The stamped-steel framework supports a rigid polypropylene cone with EVC™ (Extended Voice Coil) technology for the best sonic quality. Using zero-protrusion PEI tweeters with neodymium magnets, you get the clarity you need without interfering with factory grilles. These CS speakers work best with 100 watts of recommended power.
General Features:
- 2-Way Speaker Design
- 6.75" Woofer Size
- .5" Tweeter Size
- 3.3 Ohms DC Resistance
- 300W Peak Power
- 100W RMS Power
- 90dB Sensitivity
- 40-20kHz Frequency Range
- 5.5" Mounting Hole Diameter
- 3/16" Top Mount Depth
- 1-13/16" Bottom Mount Depth
- Fits nearly every car made
- Zero-protrusion tweeters to fit nearly any factory depth
- Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion
- UV-treated poly-foam surround resists heat or direct sunlight
- Large woofer magnet in a heavy-duty motor for ultra-clean bass
- PEI-tweeter construction provides superb clarity
- Neodymium tweeter magnets allow for increased volume in high frequencies
- Steel mesh grilles included for speaker protection
UPC Code 713034088370
Looking to switch to Satellite Radio, now is the time. The SiriusXM connect Vehicle Tuner comes with a three months of service free*. This tuner is easy to use and can give any SiriusXM Ready car stereo crystal clear reception. It is so easy to install you will be setup and ready to go in no time; so you never miss a beat. It comes with a magnetic antenna mount, SiriusXM connect Vehicle Tuner, and an installation guide. This tuner is compatible with many different professional car stereo brands like, Advent, Alpine, Car show, Clarion, Dual, Fusion, Garmin, Jensen, Jensen Heavy Duty, Jensen Marine, JVC, Kenwood, Magnadyne, Panasonic, Pioneer, Polk, Rockford Fosgate, Rosen, Sony, West Marine, and Xite Solutions. See above pictures for a complete list of compatible stereo models. *See complete details on the SiriusXM website.
General Features:
- Satellite Connect vehicle tuner with 25 ft cable
- Satellite antenna with 23 ft cable
- works only with in-dash receivers with the Satellite Ready logo
- TuneMix and SportsFlash
- pause, rewind, and replay up to 60 minutes of live satellite radio broadcasts
- game, song, and artist alerts
- Satellite Xtra Channels
UPC Code 884720013164
Replace the radio in your Harley-Davidson® motorcycle with a 2” tall (Single-DIN) aftermarket radio and retain the use of the built-in handlebar audio controls and other features using Saddle Tramp’s installation kit. This kit includes an interface with a water-resistant enclosure that allows the original factory handlebar audio controls, if equipped, to work with the new aftermarket radio. It also includes an LCD screen to display the oil pressure and EITMS status so you can still see this information after replacing the factory radio. An antenna adapter and harness are also included for a complete installation (radio not included).
Features:
- Stereo installation kit designed for a 2” tall Single-DIN radio
- Includes LCD screen to display oil pressure and EITMS status
- Includes water-resistant enclosure for added protection of the interface
- Includes threaded brass inserts to hold upper metal tray
- Made from the highest quality ABS plastic for an original factory-like fit and finish
- Includes antenna adapter, brackets, and hardware parts needed with detailed installation instructions
- Interface is Micro “B” USB updatable
Includes one Saddle Tramp interface module to:
- Retain built-in handlebar audio controls
- Retain balance
- Provide accessory power (12-volt 10-amp)
What’s in the box:
- Radio housing and brackets
- Wiring harness
- 40-EU10 antenna adapter
- Interface module with water-resistant enclosure and harness
- LCD screen and back plate
- Screws and hardware
- Installation instructions
UPC Code 086429414017
Custom spacer designed for installation of 6-1/2 to 6-3/4 inch aftermarket speakers and works with all varieties of speakers including component drivers. These adapters provide a gapless fit between the speaker and the kit. Painted to match factory color. High-grade ABS plastic construction for increased durability.
General Features:
- 6-1/2" - 6-3/4" Speaker Adapter Plate
- For 1998-2013 Harley Davidson Touring vehicles
- Designed and manufactured with precision tolerances
- Gapless fit between the speaker and the kit
- Painted to match factory color
- Factory matched texture style
- High-grade ABS plastic construction
- Color: Black
Compatibility List:
- 1998 - 2013 Electra Glide with Fairing
- 1998 - 2013 Road Glide with Fairing
- 2006 - 2013 Street Glide with Fairing
UPC Code 086429288472
Big sound meets big value. Use this flexible two-channel KM-Series Marine amplifier to power your system like only KICKER can! Using Class A/B power, this amp features a variable bass boost with KickEQ giving you as much as 6dB of extra bump. A powerful 12dB crossover is also included, letting you quickly tune your system to perfection.
General Features:
- Class A/B
- 190 Watts of Dynamic Power
- Stereo Amplifier with Bridging Capability
- Conformal-Coated Circuit Board
- Variable 12dB Crossover
- KickEQ Variable 6dB Bass Boost
- Real Marine ABYC/NMMA-Compliant Power Connections
- 316L Stainless-Steel Hardware Included
- POWER [watts/ch], 2 OHM STEREOL: 75 x 2
- POWER [watts/ch], 4 OHM STEREO: 40 x 2
- POWER [watts/ch], 4 OHM BRIDGED MONO: 150 x 1
- FREQUENCY RESPONSE [Hz]: 10-20k, +0/-1dB
- INPUT SENSITIVITY: High Level 250mV-10V, Low Level 125mV-5V
- SIGNAL-TO-NOISE RATIO: >95dB, a-weighted, re: rated power
- ACTIVE CROSSOVER: 12dB/octave, variable 50-200Hz, selectable high pass, low pass or all pass
- KickEQ BOOST: Variable 0-6dB, centered @ 40Hz
UPC Code 713034020363
