JVC KD-T925BTS Single DIN Bluetooth USB/AUX CD Player AM/FM Radio SiriusXM Ready Receiver w/Install Kit, 2x 6x9" 180W Max 2-Way Speakers w/Adapters, 4-Channel Amplifier w/Kit, Handlebar Controls, Wire

---

This unit has lots of inputs and outputs for your audio gear, the JVC KDT925BTS CD receiver is made for you. Featuring wired and wireless connections for your smartphone, a pair of USB ports and an aux input, and three pairs of preamp outputs for amplifiers. JVC has spiced this receiver up with Amazon Alexa voice control and LED lighting customization on its front panel.

General Features:

• CD Receiver featuring Bluetooth
• AUX/USB Inputs
• Backlit Display
• Conformal Coated PCB
• 13-Band EQ
• 2-Zone Variable-Color Illumination
• JVC Remote App Compatibility
• 4.0V High-Voltage 3 Pre-Outs
• Space Enhancement
• Sound Response
• Sound Lift
• Audio Streaming & Control
• iPhone Bluetooth Automatic Pairing
• 2-Line VA LCD Display
• High Current 1.5A Charging
• Satellite Radio Ready
• Wired Remote Control (Optional)
• Steering Wheel Remote Control Ready
• AM/FM Tuner
• 18FM, 6AM Preset Stations
• MP3/WMA/WAV/AAC/FLAC Playback

UPC Code 046838002861

---

Pair of Kicker 40PS694 6x9 180 Watts Peak / 90 Watts RMS 4-Ohm ATV/Motorcycle Speakers with Grilles


UPC Code 713034065760

---

The BC-HDSWC-WR Harley-Davidson Handlebar Control allows installers to replace the radio in a motorcycle, while retaining the use of the factory handlebar audio controls. This easy-to-install interface uses a patented Auto-Detect system to configure itself for the specific motorcycle application and aftermarket radio being installed. The interface provides wires for front speakers, constant power, switched power and ground, and includes a water-resistant enclosure. This product works with the 95-HDIF2 Harley-Davidson Road Glide FLT/Sharknose fairing (sold separately). It can be made to work with all models by pairing with Metra’s BC-9725 Amp Bypass Harness.

General Features:

• Retains the factory handlebar audio controls
• Auto-Detect configures itself for the specific motorcycle application and aftermarket radio
• Comes with a plug-n-play harness in a water-resistant case
• Provides wires for speakers, constant power, switched power and ground
• Use the BC-9711 to retain rear speakers
• This part number replaces the HD-ASWC-1

Note:

• Fits Harley-Davidson FLH & FLT 1998-2013 (FL models with a fairing)
• Must be without factory amplifier, 2 speaker systems only

UPC Code 086429415762

---

Metra Saddlebag Replacement Lids are designed with 6”x9” speaker adapters under the lid for correct 6”x9” fitment, and provide a better fit than any others on the market. They have metal mesh speaker grilles and are finished in gloss black and can go from package to bike. They can also be painted.

Features:

• One pair of bag lids with 6"x9" speaker adapters
• Metal mesh speaker grilles
• Factory latch assembly transfers to the new bag lid
• Additional hardware, rubber gaskets, and cloth tether restraints included
• Fits models with Saddlebags

UPC Code 086429358144

---

Designed specifically to greatly improve the sonics of a typical “deck and four” or OEM sort of system, this Kicker KEY amplifier uses powerful digital signal processing to bring concert realism to your car. Press the selector, and the microphone goes to work. The KEY uses a powerful internal computer to deliver dramatic improvements in realism and soundstage.

A massive 40-band equalizer improves tonality, and a 24dB crossover re-defines the capabilities of each speaker. The concert quality of your factory stereo is revealed! What would take hours for a professional to achieve happens in a matter of minutes. All automatically. All with the press of a single button.

General Features:

• 200 Watts Of Power (50x4)
• Auto EQ Microphone With Selector Switch Included
• Compatible with Start/Stop Vehicle Technology
• FIT2™ Technology Included
• Turn On Via Remote 12v Signal Or DC Offset
• Auto 40-Band Equalizer
• Bi-Amp Capability (Defeatable)
• Auto Compressor (Defeatable)
• Kicker EQ Preset (Defeatable)
• Auto Time Alignment (Defeatable)
• Auto Level Adjustment (Bi-Amp Mode Only)
• Auto Speaker Size Detection
• 24dB Crossovers
• 60/80/120hz High Pass Filter (Defeatable)

Specifications:

• Power (watts/ch), 4 Ohm stereo: 50x 4
• Microphone/Kicker EQ button: included
• Standard dimensions(H x W x L): 1-11/16 x 2-3/4 x 7-3/8
• Metric dimensions(H x W x L): 4.3 x 7 x18.7
• Frequency Response (Hz): 20-20k, +0/-1dB
• Input Sensitivity: high level 250mV-10V
• Signal-to-Noise Ratio: >90dB, a-weighted, re: rated power
• Active Crossover: 24dB/octave, selective high pass or all pass @60,80, or 120Hz

What's in the Box:

• 1 - 4 channel power amplifier
• 1 - microphone
• 1 - microphone cable with switch
• 1 - fuse holder
• 1 - manual and installation hardware

UPC Code 713034013174

---

The Metra 99-9700 single DIN dash kit for select 2014 and up Harley Davidson motorcycles comes with everything you need to install your new stereo into your beloved Harley. The kit comes with an integrated LCD screen from AXXESS to display oil pressure and EITMS (Engine Idle Temperature Management System), which keeps your bike cool by shutting fuel off to the rear cylinder at a preset temperature. The radio interface also supplies ignition power and illumination, and sends a “health message” to the bike which means the security light in the dash won’t be stuck on after removing the radio.

• Installation Dash Kit for Single DIN Radios
• For 2014 and up Harley Davidson motorcycles
• Accommodates ISO Single DIN mount
• Designed and manufactured with precision tolerances
• Painted to match factory dash color: Black
• Works for :
• Harley Davidson Street Glide 2014-up
• Harley Davidson Electra Glide 2014-up
• Harley Davidson Ultra 2014-up
• Harley Davidson Limited 2014-up
• Kit Includes:
• A) Radio housing
• B) Brackets
• C) LCD display
• D) LCD back plate
• E) (10) #8 x 3/8” Phillips screws • Axxess interface

UPC Code 086429301331

---

Power your marine amplifier with a wiring kit that can withstand the harsh environment and still deliver full sound performance. Fully tinned wiring ensures that these amp kits won’t corrode or oxidize and turn green after a season on the water. Oxygen-free copper provides a reliable connection with maximum conductivity. By using 100% virgin copper the tin won’t flake off, something commonly seen when using recycled copper materials. While it is also common to tin just the tips of the wire for cost savings, this practice does not actually provide any benefits. Metra’s amp kits use fully tinned copper wire from top to bottom that can withstand a harsh marine environment and salty air. The ignition-protected 50-amp circuit breaker is IP67 rated with stainless steel connection points for corrosion resistance

Amplifier Wiring Kit:

• Marine compliant amplifier wiring kit
• Fully tinned 100% virgin copper wire
• BC5W2 marine compliant jacket
• 50-amp marine circuit breaker is rated IP67 with stainless steel connection points for corrosion resistance
• Easy to solder tinned wiring
• Connectors, ring terminals, and wire ties included

What’s in the box:

• (1) 8-gauge tinned oxygen-free copper side-by-side red power and yellow ground wire (10ft.)
• (1) 18-gauge tinned oxygen-free copper blue remote turn-on wire (18ft.)
• (2) 8-gauge ring terminal with shrink tube and logo, pre-terminated on each end of the 2ft. red wire
• (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on 8ft. red wire
• (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on yellow wire
• (1) Ignition protected circuit breaker (50-amp)

UPC Code 086429416820

---

A ground-breaking virgin-PVC, Hyper-Flex insulation and multi-strand construction allows you to bend, twist, and contort the cable in any way imaginable for an ultimate installation experience while delivering maximum current flow; remains ultra-flexible under hot or cold temperature extremes; transfers the cleanest audio signal possible by using tightly twisted, silver-tinned OFC copper conductors; zip line to easily remove outer insulation.

Speaker Wire:

• 20 Feet
• 16 Gauge
• Silver-tinned OFC (oxygen-free copper)

UPC Code 632016086404