Kenwood KMR-M325BT Marine Digital Media Bluetooth Receiver, 4 x Pioneer 6.5" 3-W
This marine/motorsports single-DIN digital media receiver comes packed with an array of features sure to boost your vehicle's infotainment system to the next level. This receiver features built-in Bluetooth and USB/AUX inputs to connect to your preferred smart devices, satellite radio readiness, and AM/FM radio. Use the remote control app to gain intuitive control over the receiver's features through your phone! The bright display offers visual customization through a variable color illumination. The conformal coating improves the durability of the circuit boards, making it reliable in open-environment applications!
General Features:
- 255 Segment 1.5 Line Text Display
- Bluetooth Direct Access Button
- Bluetooth Built-In
- Variable Color Illumination
- 13-Band EQ & DTA
- Conformal Coating
- Optional Wired Remote Control Ready
- Front USB & AUX IN
- 3 Preouts 4.0V
- AM/FM Radio Tuner
- Dual Phone Connection
- Satellite Radio Ready
- Drive EQ
- Short Chassis
- Remote App
- Music Mix
UPC Code
Deeper and richer bass sound and clearer high frequency sound realizes upgrade from OEM system with perfect fitment. As most of the cars feature a six inch space for mounting speakers on the door: TS-A1677S is a perfect solution for replacing your in-built speakers. The open & smooth sound concept delivers open staging & smooth transitions of driver response to provide the ultimate in-car response. The new rigid Carbon and Mica reinforced IMPP cone and elastic polymer surround provide quicker response and higher sensitivity produces deep and rich bass sound. A new magnetic circuit and a long and symmetrical voice coil make both rich bass and low distortion possible. Listen to rich and clear sound with 320 watt peak power output from perfect fitted speakers.
General Features:
- Type: Coax. 3-way
- Maximum Music Power: 320 W
- Nominal power: 70 W
- Frequency Response: 37Hz to 24kHz
- Impedance: 4Ω
- Cone size: 6-1/2"(165mm)
- Sensitivity: 87dB
- IMPP Composite Woofer Cone
- Elastic Polymer Surrounds
- Pulp Midrange Cone
- PET Tweeter
- Full Covered Grilles
- Optimized Motor Design
UPC Code 884938468398
Enrock's EEA720.4 4-channel amplifier was designed compact yet rugged. The outdoors can be a tough spot for audio gear so Enrock considered the salt, spray and sunlight when designing this Class D amplifier. With 45 watts RMS per channel this amplifier will drive your speakers no matter the application you are using it for. It’s compact enough for a bike and powerful enough for a car. You’ll have no trouble hearing your tunes over the wind and waves with this powerful amplifier.
Weather Resistant for Marine Application
Durable and Powerful for Automotive Use
Compact and rugged for Off-Road Installation
This compact amplifier will fit into a storage compartment on a boat, motorcycle, ATV, or car with optimal performance, despite its size. Should you decide to add a pair of subwoofers you can bridge this amp to a 2-channel mode and send 120 watts to each subwoofer, or switch to 3-channel mode to get a pair of speakers and a subwoofer. With high-pass and low-pass filters, plus bass boost, you can customize your sound output just the way you take your tunes.
EEA720.4 GENERAL FEATURES:
- 4-channel marine/powersports/ car amplifier
- 45 watts RMS x 4 at 4 ohms (60 watts RMS x 4 at 2 ohms)
- 120 watts x 2 bridged at 4 ohms
- Class D amp technology
- 720 Watts Peak Power
- variable high- and low-pass filters
- Sealed Chassis for use in harsh environments
- Ultra-efficient full range class D operation
- Built-in Crossover- maximum flexibility
- 2 or 4 channel input
- Signal to noise ratio 97db
- High pass filter 120Hz/80Hz
- Input range: 200mV-10V
- Frequency Response: 20Hz to 20KHz
UPC Code 728120454069
Enrocks EHDRAB98-13 allows you to install a single din receiver into your Harley Touring Bike. The wire harness is included with the dash kit to make wiring more convenient.
General Features:
- Single DIN radio provision
- For Harley Davidson (FL models with fairings) Touring 1998-2013
- Gapless fit between the dash and the kit
UPC Code 728120484431
The BC-HDSWC-WR Harley-Davidson Handlebar Control allows installers to replace the radio in a motorcycle, while retaining the use of the factory handlebar audio controls. This easy-to-install interface uses a patented Auto-Detect system to configure itself for the specific motorcycle application and aftermarket radio being installed. The interface provides wires for front speakers, constant power, switched power and ground, and includes a water-resistant enclosure. This product works with the 95-HDIF2 Harley-Davidson Road Glide FLT/Sharknose fairing (sold separately). It can be made to work with all models by pairing with Metra’s BC-9725 Amp Bypass Harness.
General Features:
- Retains the factory handlebar audio controls
- Auto-Detect configures itself for the specific motorcycle application and aftermarket radio
- Comes with a plug-n-play harness in a water-resistant case
- Provides wires for speakers, constant power, switched power and ground
- Use the BC-9711 to retain rear speakers
- This part number replaces the HD-ASWC-1
Note:
- Fits Harley-Davidson FLH & FLT 1998-2013 (FL models with a fairing)
- Must be without factory amplifier, 2 speaker systems only
UPC Code 086429415762
This Kicker complete amp kit features top-quality Hyper-Flex power, ground and turn-on cables. K Series speaker wire and interconnects are also included, as is a heavy-duty AFS fuse holder and fusing. Insulated crimp connectors and zip ties come in the kit as well.
This Complete Eight Gauge Amp Kit comes complete with Full Spec wire, hardware, fusing and signal cable.
Hooking up an amp is easy when get everything you need in one place. The best hardware, signal and power cable comes in one convenient package, plus get an additional year of warranty when you buy a Kicker amp with this kit.
All kits include pure, full-spec OFC (oxygen-free copper) cabling for max power transfer, superior bass response and signal clarity.
Included in Amp Kit:
- 17 ft 8 awg blue power wire
- 4 ft 8 awg gray ground wire
- Self tapping bolt and washer
- FHS fuse holder with 60 amp fuse L=3.06", W=1.33", H=1.32"
- 17 ft 16 gauge remote wire
- 16.4 ft KI RCAs
- 12 ft Q series 12 awg speaker wire
- 6x 6" zip ties
- 8 awg firewall grommet
- 1x 18-22 awg butt connector
- 4x 12 awg fork terminals
- 2x blue fork terminal boots
- 2x black fork terminal boots
UPC Code 713034088660
Enrocks EHDSA98-13 brackets will allow you to install select 6 1/2" or 6-3/4" speakers in the factory speaker openings of select 1998 - 2013 Harley Davison Bikes.
General Features:
- 6-1/2" - 6-3/4" Speaker Adapter Plate
- For 1998-2013 (FL models with fairings) Harley Davidson Touring
- Gapless fit between the speaker and the kit
- High-grade ABS plastic construction
- Color: Black
UPC Code 728120484486
This rugged Enrock EKMR1 marine soft wire universal antenna gives you performance, durability and plenty of placement options. The flexible wire makes it the perfect hideaway antenna, while the corrosion-resistant rubber exterior confirms that it will stand up to salt and spray. The 22inch long flexible wire will make mounting it a breeze.
General Features:
- 22" AM/FM Marine Antenna
- Improves Radio reception
UPC Code 799861388630
Enrock's 16-Gauge Speaker Wire is a smart solution to your audio installation. This wire comes in 50 feet to give you convenient installation and pure sound quality enhancement. The cable is tinned and oxygen free copper (OFC) to deliver high-quality sound without any transmission loss. Marine grade speaker wiring made simple. Just use high quality marine duplex wiring with it's fine stranded tin plated copper to resist corrosion.
General Features:
- Connects audio speakers to your Audio Video (A/V) receiver or amplifier.
- Marine grade tinned wire
- Oxygen Free Copper (OFC)
- Length: 50 Feet
- Gauge: 16
UPC Code 728120479901
