Pyle PLMRMP3B 4-Channel 800 Watt Waterproof Micro Marine Black Amplifier Bundle Combo Two Pairs (QTY 4) Of Pyle PLMR60B 6.5" 150W Max Power Full Range Dual Cone Waterproof Boat Stereo Black Speakers

---

These 150-watt, 6.5' two-way Hydra-series Pyle marine speakers are perfect for your boat or other marine application, providing great sound on land or at sea. The 2-way waterproof construction and black trim give these speakers a touch of elegance. The 1' aluminum voice coil provides quality mid-range, while the ½' dome tweeter fills in the high end. It all sits in a molded ABS basket that keeps your equipment safe and increases its longevity. 4 ohm impedance.

Speakers:

• 6.5'' Dual Cone Full-Range Speakers
• Waterproof Marine or Car Use
• Power Handling: 150 Watts Peak
• Polypropylene Cone With Cloth Surround
• Built-in Molded Grill
• Molded ABS Plastic Basket
• 1" Aluminum Voice Coil
• 20oz Circuit Magnet
• Frequency Response: 45Hz - 16k Hz
• 4 Ohms Impedance
• Complete with Wires Mounting Hardware

UPC Code 782926501419

---

The Pyle PLMRMP3B is a compact and waterproof 4-Channel Marine Amplifier designed for mounting possibilities in numerous applications and makes it simple to expand the audio system capabilities for your vehicle - perfect for your boat, ATV or RV.

The Hydra Series Amplifier System comes with everything you need to give your sound system a serious boost while providing protection against the elements. Add up to 400 Watt Max power (200 watt power on each of the 2 channels). Create a fitting and truly custom installation with this sound system.

This amplifier kit comes with a waterproof poly bag with 3.5mm jack so you can enjoy playing your favorite audio files from your iPod/MP3 player. The system includes RCA line inputs and the kit comes with a 3.5mm-to-RCA adaptor so you can connect your device. You can also connect standard high and low level inputs from a marine head-unit or car stereo/radio.

Input Level: Set the input sensitivity of the amp. If you are connecting to a LINE level source (typically an RCA type connection) then the switch should be in the LINE (out) position. When connecting to speaker outputs, headphone, or high level car radio sources then set the switch to the SPEAKER position.

Polarity: This switch allows the user to optimize bass performance in the case that there are more than 1 set of loudspeakers producing bass in the system. Play some music with strong bass content and listen with the switch alternately in the NORMAL and REVERSE position until it can be determined which settings results in more pleasing bass response.

Gain Control: Adjusts the overall level of the amplifier. When using the amp without volume control, the level should be set to achieve a balance with other loudspeakers in the system. As a rule, you should keep the gain settings as low as possible while still ensuring that the system will reach its full output power.

Volume Control: Plug for the waterproof remote volume control. When installed, this control will power off the amp when turned all the way down

RCA Stereo Input: Connect external audio devices like an iPod or just about any other MP3 player.

• 4 x 100 Watts RMS at 4 Ohms
• 4 x 200 Watts Max at 4 Ohms
• 4 x 300 Watts RMS at 2 Ohms
• Fuse: 10A
• RCA Line Input
• T.H.D: <0.05%
• Soft Turn On/Off
• S/N Ratio: >95dB
• Anti-Thump Turn-On
• 2 Ohms Stereo Stable
• Power Protection Circuitry
• Channel Separation: >65dB
• Volume Gain Remote Control
• Electronic Crossover Network
• Remote Control for Volume Gain
• Adjustable High Low Level Inputs
• Frequency Response: 10Hz - 40kHz
• Dimensions: 6.10'' L x 3.35'' W x 1.38'' H

UPC Code 068888742566