4x Infinity 6.5" 300W Marine White LED Speakers, USB Bluetooth Stereo Receiver
This radio features state of the art Bluetooth technology allowing music to wirelessly stream from an audio source to the receiver you just purchased. Why Bluetooth? From a practical standpoint, Bluetooth enables your music device (if applicable) to be placed in a glove box, your overhead console, or even your pocket-places that are dry-without having to install a separate docking station.
In addition, Bluetooth audio streaming will work with any Bluetooth enabled device, not just one brand of media. Once connected, you can use your receiver to control your media device and vice versa! Bluetooth has a range of approximately 30', depending upon conditions, so once your boat is parked, feel free to control the stereo through your media device!
General Features:
- Bluetooth Audio Streaming
- 4 x 50 watts
- Solid aluminum chassis
- Aux-in
- Portable-media ready
- USB input
- ASTM117 salt fog
- 1 pair of RCA outputs
- IP66 waterproof face
- 6" (L) x 4" (W) x 2 1/2" (D)
- Auxiliary Input: Yes
- Color: Black
- Power - Output (Watts): 4 x 50w
- Wired Remote Capable: Yes
- SiriusXM Ready: No
- Bluetooth: Yes
- RCA Output: Yes
- RCA Input: No
What's in the box:
- Radio
- 4 x 50 watts
- Mounting Screws
- Mounting Brackets
- Pigtail
- USB input
- Barcode
- Manual
- Foam Cutout
UPC Code
These Infinity's Kappa Marine loudspeakers leverage Infinity’s world class audio engineering and music reproduction with purpose-built marine loudspeakers that will survive the rigors of the harsh marine environment. These 6-1/2" coaxials feature Plus One polypropylene woofer and midrange cones, Mylar tweeter domes, one piece cast polymer baskets, sealed magnets, and rubber woofer surrounds for high SPL performance. These speakers are UV resistant in a marine grade IPX3(IPX5 from front) weather resistant and include RGB perimeter illumination and go through 300 hours of salt spray testing.
General Features:
- Power Handling: 100 watts RMS, 300 watts peak power
- Sensitivity: 92dB at 2.83 volts
- Frequency Response: 40 - 25kHz
- Voice Coil Diameter: 1 in. (25.5mm)
- Impedance: 3 ohm impedance
- Plus One Woofer Cones
- Perimeter RGB Illumination
- One Piece Polymer Basket
- Mylar Tweeters
- Harman Standard Reliability Testing
DO NOT USE DRILLS ON THE SCREW SPEAKER TERMINALS EVER.
Loosen and Tighten BY HAND ONLY. Using a Drill snaps the solder connection on the back of the terminal and the X-over (coax) Circuit board.
UPC Code 050667373061
