Pyle AM FM Radio Digital Media Receiver, 2x 6.5" 150W Speakers, Banana Plugs
This 200-watt amp brings music to the living room with crystal clear clarity. With plenty of inputs, you won't find this amplifier lacking. It plays AM/FM thanks to the built in tuner - store up to 50 presets It's equipped with three RCA inputs on the back and two ¼' mic jacks on the front, so you can turn this amp into a karaoke machine - even add an echo effect. Easily adjust the volume, balance, treble, bass on the master output for total control of your sound. AM/FM antenna included. Runs on 110 and 220 V AC.
General Features:
- Stereo Amplifier
- Power Main: 50W x 2 @ 8 Ohm, 100W x 2 @ 4 Ohm
- Audio Inputs with A/B Speaker Outputs
- AM/FM Radio with Digital Display Screen
- Auto Scan,Memory, Radio Station PREVIOUS/NEXT control
- 50 Radio Station Pre-Set Memory
- Main Channel Volume, Balance, Treble, Bass & Gain Controls
- Microphone Volume, Bass, Treble & Echo Controls
- Two Microphone Input JackS
- Three RCA Input Source
- 110/220V Power Switch
- AM/FM Antenna and Remote Control Included
- Dimension:17'' x 11.5'' x 4.7''
- Weight:14.3 LBS
- Sold as: Unit
- Weight: 13.33 lbs.
UPC Code 068888899987
Rock that legendary KICKER sound inside, outside or out and about! Play the KB6 on your backyard deck, under the eaves, inside the shop, or near the pool for great sound, rain or shine. You can even go mobile! Use the universal bracket to mount the KB6 on your boat, off-road vehicle or RV.
The KB6 is a full-range, high-efficiency speaker system truly suitable for indoor and outdoor use. Providing an 8-Ohm load and ready to be driven by your home stereo receiver or a car-audio amplifier, you can easily run a single pair or more with minimal effort (min. 18 AWG speaker wire required for easy-pinch terminals). The included bracketing makes it easy to install vertically or horizontally - on nearly any flat surface.
Designed as a dual-enclosure weatherproof system, the KB6 features bold 6-1/2 -inch KICKER woofers and 2 x 5-inch, compression-loaded horn tweeters. The woofers utilize precisely tuned polypropylene cones and rugged Santoprene® surrounds. The system acoustically blends powerful bass and thrilling highs for an all-weather KICKER sound you’ll love to listen to all day long.
General Features:
- Compression Loaded Horn Tweeters
- Polypropylene Woofer Cones
- Santoprene Surrounds
- Full-Range Sound Reproduction
- Type: 2-Way
- Components per Enclosure: 6.5" Woofer, 2x5" Horn
- Peak Rec Amp Power: 150W
- RMS Rec Amp Power: 75W
- Frequency Response: 55-21kHz
- Impedance: 8-Ohms
- Sensitivity: 90dB 1w/1m
- Grilles: Yes
- Standard Dimensions (in.): 11W x 8-1/8H x 8-1/8D
- Metric Dimensions (cm.): 27.9W x 20.7H x 20.7D
UPC Code 713034004011
Secure, High-Performance Connections with Enrock Dual Set Screw Banana Plugs
Upgrade your audio setup with Enrock’s premium banana plugs, designed for reliability, durability, and clean signal transfer. Featuring a dual set screw design, each plug firmly secures your speaker wire in place to prevent loosening and ensure consistent performance over time. The black and red anodized aluminum shells not only provide a sleek, professional look but also make polarity identification quick and effortless.
With six pairs included, this set is perfect for complete home theater or stereo installations. Built for easy installation and long-lasting use, Enrock banana plugs deliver the dependable connection your sound system deserves.
General Features:
- High-quality banana plugs for secure speaker wire connections
- Dual set screw design for a tight and reliable hold
- Durable aluminum shells with black and red color coding
- Compatible with most speakers, receivers, and amplifiers
- Supports clean signal transfer with minimal loss
- Easy installation with no soldering required
- Corrosion-resistant construction for long-lasting performance
- 6 pairs (12 plugs) included
- Ideal for home theater, car audio, and professional audio setups
UPC Code 840440927242
EnrockAudio 16-Gauge Speaker Wire
This 16-gauge speaker wire with spool from EnrockBasics lets you easily connect your speakers to amplifiers or receivers.
Marked Polarity
One side of the wire is marked with a white line, making it quick and easy to distinguish the polarity and get your audio system set up properly.
Easy to Use
The EnrockAudio 16-gauge Speaker Wire comes wrapped around a hard plastic spool that makes dispensing convenient and easy.
Details
Connects audio speakers to your A/V receiver or amplifier no distortion. The plastic jacket around the speaker wire helps to deliver high-quality undistorted signals to and from all of your audio equipment.
General Features:
- 50 Feet of 16-gauge speaker wire.
- Connects audio speakers to your A/V receiver or amplifier.
UPC Code 799861390381
