Pyle PT260A 200 Watts Digital Media AM/FM Radio Home Audio Stereo Amplifier Receiver, 2x Pyle PLMR24B 3.5'' 200W Max 3-Way Indoor/Outdoor Wall Mount Black Speakers, Screen Banana Plugs, Speaker Wire

$322.49
$201.49
(You save $121.00 )
SKU:
R-PT260A-1-PLMR24B-EABP12
UPC:
027581697207
Condition:
New
Weight:
17.29 LBS
Minimum Purchase:
1 unit
Shipping:
Calculated at Checkout

Pyle PT260A 200W AM FM Stereo Receiver, 2x 3.5'' 200W Speakers, Banana Plugs

Pyle PT260A 200 Watts Digital AM/FM Home Stereo Amplifier Receiver with Digital Display Screen




This 200-watt amp brings music to the living room with crystal clear clarity. With plenty of inputs, you won't find this amplifier lacking. It plays AM/FM thanks to the built in tuner - store up to 50 presets It's equipped with three RCA inputs on the back and two ¼' mic jacks on the front, so you can turn this amp into a karaoke machine - even add an echo effect. Easily adjust the volume, balance, treble, bass on the master output for total control of your sound. AM/FM antenna included. Runs on 110 and 220 V AC.


General Features:

  • Stereo Amplifier
  • Power Main: 50W x 2 @ 8 Ohm, 100W x 2 @ 4 Ohm
  • Audio Inputs with A/B Speaker Outputs
  • AM/FM Radio with Digital Display Screen
  • Auto Scan,Memory, Radio Station PREVIOUS/NEXT control
  • 50 Radio Station Pre-Set Memory
  • Main Channel Volume, Balance, Treble, Bass & Gain Controls
  • Microphone Volume, Bass, Treble & Echo Controls
  • Two Microphone Input JackS
  • Three RCA Input Source
  • 110/220V Power Switch
  • AM/FM Antenna and Remote Control Included
  • Dimension:17'' x 11.5'' x 4.7''
  • Weight:14.3 LBS
  • Sold as: Unit
  • Weight: 13.33 lbs.

UPC Code 068888899987
Pyle PLMR24B 3.5'' 200 Watt Max Power 3-Way Indoor/Outdoor Wall Mount Black Audio Speakers (Pair)




The Pyle PLMR24B 3.5" marine 3-way speakers are completely waterproof with a removeable rustproof grill featuring built in capacitor crossover network, 200 watts max power handling, Bass reflex vent for added bass response.

These 3-way speakers provide the full spectrum of sound, thanks a 3.5" aluminum injection cone woofer with a 24 oz. magnet for the low end, a 1.75" wide dispersion cone for the midrange, and a 1" super dome tweeter for the highs. The built in capacitor crossover network does all the hard work - you just plug them in using the quick connect terminals and hit ‘play'. Bass reflex vent provides even more low end for your buck.


General Features:

  • Excellent for Use On Boats/Marine/Decks/Poolside/Outdoors
  • Completely Water Proof
  • 3.5'' Aluminum Injection Cone Woofer
  • 24 Oz. Magnet Structure
  • 1.75'' Wide Dispersion Cone Midrange
  • 1'' Super Dome Tweeter
  • Capacitor Crossover Network
  • Bass Reflex Vent for Added Bass Response
  • Heavy Duty ASB Construction
  • Quick Connect / Disconnect Speaker Terminals
  • Removable Rustproof of Mesh Grills
  • Power: 100 Watts RMS / 200 Watts Peak
  • Frequency Response: 70-21 Khz
  • Impedance: 4 Ohms
  • Complete Mounting Kit Wires
  • Dimensions: 5.25''W x 3.75''H x 3.75''D


UPC Code 068889014808
Enrock (6 Pairs) Dual Set Screw Design, Black & Red Anodized Aluminum Shells Banana Plugs




Secure, High-Performance Connections with Enrock Dual Set Screw Banana Plugs

Upgrade your audio setup with Enrock’s premium banana plugs, designed for reliability, durability, and clean signal transfer. Featuring a dual set screw design, each plug firmly secures your speaker wire in place to prevent loosening and ensure consistent performance over time. The black and red anodized aluminum shells not only provide a sleek, professional look but also make polarity identification quick and effortless.

With six pairs included, this set is perfect for complete home theater or stereo installations. Built for easy installation and long-lasting use, Enrock banana plugs deliver the dependable connection your sound system deserves.


General Features:

  • High-quality banana plugs for secure speaker wire connections
  • Dual set screw design for a tight and reliable hold
  • Durable aluminum shells with black and red color coding
  • Compatible with most speakers, receivers, and amplifiers
  • Supports clean signal transfer with minimal loss
  • Easy installation with no soldering required
  • Corrosion-resistant construction for long-lasting performance
  • 6 pairs (12 plugs) included
  • Ideal for home theater, car audio, and professional audio setups

UPC Code 840440927242
Enrock 50 Feet 16 Gauge Speaker Wire




EnrockAudio 16-Gauge Speaker Wire

This 16-gauge speaker wire with spool from EnrockBasics lets you easily connect your speakers to amplifiers or receivers.

Marked Polarity

One side of the wire is marked with a white line, making it quick and easy to distinguish the polarity and get your audio system set up properly.

Easy to Use

The EnrockAudio 16-gauge Speaker Wire comes wrapped around a hard plastic spool that makes dispensing convenient and easy.

Details

Connects audio speakers to your A/V receiver or amplifier no distortion. The plastic jacket around the speaker wire helps to deliver high-quality undistorted signals to and from all of your audio equipment.


General Features:

  • 50 Feet of 16-gauge speaker wire.
  • Connects audio speakers to your A/V receiver or amplifier.

UPC Code 799861390381

1 Year Manufacturer Warranty