1000W Bluetooth Receiver, 6.5" Marine Speakers, Wireless Microphone System, Wire
With 1000-Watts of peak power and bass, treble, and balance controls this Technical Pro RXM7BT professional receiver is the perfect receiver system to bump up your audio-entertainment system to the next level. This receiver comes packed with 2 mic inputs, a recorder, built-in iOS compatibility, an AM/FM tuner w/ digital readout, and a wireless remote to give you ultimate control over all of your new receiver's features. With the ability to play MP3, WAV and WMA files, you won't have any trouble bumping your favorite tunes. Plus, this receiver's built-in Bluetooth capabilities will ensure you experience all of the features with the utmost comfort.
General Features:
- 150 watts RMS Both Channels Driven @ 1.0% THD @ 8 ohms
- 1000 watts peak power
- AM./ FM tuner with Digital Readout
- Inputs: RCA (2 audio sources), Bluetooth, USB, SD Card, MP3 (AUX)
- Outputs: Banana binding post (2 speakers), push Button (surround speakers),
- RCA (Line Out), 2 Mono RCA (Subwoofer Out)
- USB & SD Card maximum size: 32GB
- Plays .mp3, .wav, .wma files from USB drives and SD Cards
- 128 kbps / 32 KHz sampling rate on .wav file recordings
- Digital fluorescent output display meter
- Bluetooth® compatibility allows for wireless connection to any A2DP stereo
- Bluetooth device
- Bluetooth Range: 30 Feet
- Bass, treble and balance controls
- Dual mic inputs with volume, echo, and tone controls
- Frequency Response: 20Hz-20KHz
- Headphone output (1/8")
UPC Code 817802014346
The KB6000 is now a full-range, high-efficiency speaker system truly suitable for indoor and outdoor use, providing an 8-Ohm load and ready to be driven by home stereo receivers. That legendary KICKER sound is now made to rock from a backyard deck, under the eaves, or near the pool, and it still provides great sound on a boat, off-road vehicle or RV.
This white or black, dual-enclosure system features bold 6-1/2 -inch KICKER woofers and 2 x 5-inch, compression-loaded horn tweeters firing a favorite music mix. The woofers utilize precisely tuned polypropylene cones and rugged Santoprene surrounds. The system acoustically blends with a 12dB/octave low-pass crossover with impedance compensation to nail that signature sound.
- Power Handling:
- Peak: 300 watts per pair / 150 watts each
- RMS: 150 watts per pair / 75 watts each
- Great for the house, office, outdoors, or even your car
- Size: 6-1/2" Woofer
- 2" x 5" Compression Loaded Midrange/Tweeter
- Water Resistant Molded Enclosure
- Used in Outdoor Applications
- Rubber Feet Included for Bookshelf Mounting
- Frequency Response: 55-21,000 Hz
- Impedance: 8 ohm
- Dimensions: 8-1/8"W x 8-1/8"D x 11"H
- Also available in: White
UPC Code 713034055808
The Pyle PDWM2135 delivers clear, noise-free wireless transmission and excellent sound reproduction. Simple setup and installation allow you to transmit clear sound instantly. System features include (2) handheld microphones, VHF narrow band system, dual frequency design, high signal to noise ratio performance and more. Enjoy dual channel voice distribution across the handheld microphones. Whether used for work or play, for on-stage vocal performances or conference room speeches, this wireless microphone system will provide you with a quality audio experience. Enjoy hassle-free and reliable wireless sound transmission with today's latest system technology with this all-in-one package.
- VHF Narrow Band Receiver System
- Dual Frequency Design (Channel A/B)
- High Signal/Noise Ratio Performance
- Broad Frequency Response Range & Low Distortion
- Independent Adjustable Volume Control
- Dual Independent Channel Antennas
- RF Signal and AF Signal LED Indicators
- Radio Frequency and Audio Frequency
- Includes (2) Handheld Microphones
- System Receiver:
- Channel Frequency: 174~216MHz
- Sensitivity: -95dBm (S/N:12dB)
- RF Image Rejection:-75dB
- Audio Dynamic Range: 95dB
- T.H.D.: <1%
- Frequency Stability: ±0.002%
- S/N Ratio: >70dB
- Neighboring Channel / Interference: >70dB¬¬
- Frequency Response: 50Hz~15KHz ±3dB
- Power: AC 120V, 60Hz
- Receiver Dimensions (L x W x H): 8.07'' x 5.75'' x 1.64''
- Microphones:
- Carrier Frequency:174~216MHz
- RF Power Output: >13dBm
- Modulation Degree: >30KHz
- Power Current: <110mA
- Frequency Stability: ±0.002%
- Harmonic at Higher Degree: <60dB
- Modulation Pattern: FM
- Battery Powered: Requires 2 x 'AA' Batteries
- Sold as: 1
- Weight: 2.05 lbs.
UPC Code 068888758307
EnrockAudio 16-Gauge Speaker Wire
This 16-gague speaker wire with spool from EnrockBasics lets you easily connect your speakers to amplifiers or receivers.
Marked Polarity
One side of the wire is marked with a white line, making it quick and easy to distinguish the polarity and get your audio system set up properly
Easy to Use
The EnrockAudio 16-gauge Speaker Wire comes wrapped around a hard plastic spool that makes dispensing convenient and easy.
Details
Connects audio speakers to your A/V receiver or amplifier
No Distortion
The plastic jacket around the speaker wire helps to deliver high-quality undistorted signals to and from all of your audio equipment.
General Specifications:
- Connects audio speakers to your Audio Video (A/V) receiver or amplifier.
- Features a plastic jacket around the speaker wire helps to deliver high-quality undistorted signals.
- The white line on one side of the wire makes it quick and easy to distinguish the polarity to get your audio system set up properly.
- Comes wrapped around a hard plastic spool that makes dispensing convenient and easy.
- Length: 50 Feet.
- Gauge: 16.
UPC Code 799861390381