Infinity PRV250 Bluetooth AM/FM Stereo Digital Media Receiver, 2x 8" 500 Watt LED Speakers, 2x 6.5" 225 Watt LED Speakers, 10" LED Subwoofer, 5-Channel Amplifier w/Kit, Antenna, Wire (Bulk Packaging)

---

This radio features state of the art Bluetooth technology allowing music to wirelessly stream from an audio source to the receiver you just purchased. Why Bluetooth? From a practical standpoint, Bluetooth enables your music device (if applicable) to be placed in a glove box, your overhead console, or even your pocket-places that are dry-without having to install a separate docking station.

In addition, Bluetooth audio streaming will work with any Bluetooth enabled device, not just one brand of media. Once connected, you can use your receiver to control your media device and vice versa! Bluetooth has a range of approximately 30', depending upon conditions, so once your boat is parked, feel free to control the stereo through your media device!

General Features:

• Bluetooth Audio Streaming
• 4 x 50 watts
• Solid aluminum chassis
• Aux-in
• Portable-media ready
• USB input
• ASTM117 salt fog
• 1 pair of RCA outputs
• IP66 waterproof face
• 6" (L) x 4" (W) x 2 1/2" (D)
• Auxiliary Input: Yes
• Color: Black
• Power - Output (Watts): 4 x 50w
• Wired Remote Capable: Yes
• SiriusXM Ready: No
• Bluetooth: Yes
• RCA Output: Yes
• RCA Input: No

What's in the box:

• Radio
• 4 x 50 watts
• Mounting Screws
• Mounting Brackets
• Pigtail
• USB input
• Barcode
• Manual
• Foam Cutout

UPC Code

---

Infinity's Kappa Marine loudspeakers leverage Infinity’s world class audio engineering and music reproduction with purpose-built marine loudspeakers that will survive the rigors of the harsh marine environment. The lineup features the three most popular sizes for boats and watercraft. The 6-1/2" coaxial, 8" three-way convertible speaker system and 10" woofer have Plus One™ polypropylene woofer and midrange cones, Mylar tweeter domes (Except Subwoofer), one piece cast polymer baskets, sealed magnets, and rubber woofer surrounds for high SPL performance.

Wind, water or engine noise will not drown them out. Speakers are UV resistant in a marine grade IPX3(IPX5 from front)weather resistant and include RGB perimeter illumination and go through 300 hours of salt spray testing. And they're Infinity—ready to make amazing music on the water. Whether it's a daily scrub down, a picnic in a quiet cove or an all-out race across high swells, Infinity has the right configuration for your craft.

Features

Plus One™ Woofer Cones

Plus One cones provide more overall speaker-cone area than other cones in its class giving them higher sensitivity, increased low-frequency output and more distinguished musical character.

Convertible Design

To increase loudspeaker acoustics and installation versatility, the 8" (200mm) Marine Three-Way Convertible can be coaxially mounted or separated and installed as a component system. This is handy for working around placement option restrictions.

Perimeter Illumination

Unique and eye-catching RGB illumination can display seven colors out of the box—or an almost unlimited number of colors when connected to an external lighting controller.

SSI (Switch-Selectable Impedance)

New Infinity Kappa Marine 10" (250mm) woofer features an exclusive dual impedance switch that lets you choose either 2- or 4-ohm load impedance option. SSI lets you reconfigure your system with the flip of a switch. (Not available from any other manufacturer.)

Mylar Tweeters with Integrated Grilles

Weather resistant tweeters deliver smooth highs and increased power handling for more natural sound from vocals, cymbals, horns and pianos. (Grill mounted tweeters allow the front of the woofer cones to be sealed.)

One-piece Polymer basket

The polymer basket is durable over time even after prolonged exposure to sun, salt and moisture. Rubber surrounds are more reliable than foam and offer better edge protection.

High Sensitivity

A high sensitivity rating combined with above-average continuous power handling makes it one of the loudest boat speakers available without sacrificing clarity, fullness and musical character.

Voicing of Speakers

Speakers are individually voiced to ensure they deliver Infinity's true sonic signature. This means that specifications as well as speaker characteristics are considered when tuning and authenticating the signature Infinity sound. This is part of the development process spearheaded by the leading transducer engineers in the world to provide the best listening experience at any price point.

Harman Standard Reliability Testing

Infinity speakers undergo a testing process that would destroy lesser speakers. Infinity freezes them, bakes them, shakes them, blasts them with ultraviolet light and drives them at full power for days at a time.

Infinity at an Affordable Price

This is Infinity—one of the most innovative and legendary companies in audio. Infinity is one of the top-selling car speaker brands in the world—obviously, this is no coincidence. If you know audio, you know Infinity in your car, your home—why not in your boat?

General Specifications

• Power Handling 200 watts RMS, 500 watts peak power
• Pair Of Two
• Sensitivity 92dB at 2.83 volts
• Frequency Response 30 - 22kHz
• Voice Coil Diameter 1 in. (25.5mm)
• Impedance 3 ohm impedance

What's In The Box

• 2 x 8" (200mm) woofers, pr.
• 2 x Flush mount adapter with Integrated grille, pr.
• 12 x Screw
• 12 x Speed clip
• 1 x Spanner
• 2 x Closed cell foam gasket
• 1 x Twin pin tool

DO NOT USE DRILLS ON THE SCREW SPEAKER TERMINALS EVER.

Loosen and Tighten BY HAND ONLY. Using a Drill snaps the solder connection on the back of the terminal and the X-over (coax) Circuit board.

<

UPC Code

---

This JBL Club Marine Subwoofer is ready to take on your next outdoor adventure. These fully marinized subwoofers not only deliver JBL sound, but also feature RGB lighting to bring the sound to life. Engineered to withstand sun, salt, sea spray and wash downs, they feature sealed motor structure, UV resistant one-piece cast-polymer baskets, a sealed magnet and rubber surrounds. The polypropylene cone and balanced dome tweeter provide great bass, smooth highs and lots of output to ensure every note can be heard loud and clear.

General Features:

• IPx5 Marine-Rating
• Cosmetic Appeal
• Outdoor Performance
• One-Piece Polymer Basket
• Grille-Mounted Tweeters
• Rubber Surrounds
• RGB LED Lighting
• Marine Design
• Balanced Dome Tweeters
• Designed for the Elements
• Harman Standard Reliability Testing
• Individually Voiced
• Power Handling: 250W RMS, 750W peak
• Sensitivity (@ 2.83V): 89dB
• Frequency Response: 25Hz – 500Hz
• Impedance: 4 ohms
• Bulk Packaging

LED Wiring Instructions:

Lighting is controlled manually through hardwired connection. Remove the adapter at the end of the speakers to expose the wiring. It will include a Black, Red, Green and Blue wire. When hard wiring the RGB lighting, the black lead is +12V and the Red/Green/Blue leads are ground (-) There are seven colors available through hardwired connection, select your color of choice and proceed with wiring it. 

• +12V = Black
• (-) Red = Red
• (-) Green = Green
• (-) Blue = Blue
• (-) Red + Green = Lime Green
• (-) Red + Blue = Magenta
• (-) Blue + Green = Aquamarine
• (-) Red + Blue + Green = Blue/White

UPC Code 050036349925

---

These JBL OEM Replacement 6.5" Speakers w/ the RGB Lighting Option are ready to take on your next outdoor adventure. These fully marinized speakers not only deliver JBL sound, but also feature RGB lighting to bring the sound to life. Engineered to withstand sun, salt, sea spray and wash downs, they feature sealed motor structure, UV resistant one-piece cast-polymer baskets, a sealed magnet and rubber surrounds. The polypropylene cone and balanced dome tweeter provide great bass, smooth highs and lots of output to ensure every note can be heard loud and clear.

6.5" LED Speakers:

• Marine-Grade Design IPx5 Rated
• 6.5" Two-Way Multi-Element Speaker
• Multi-Color RGB LED Lighting
• Power Handling: 75W RMS, 225W Peak
• Frequency Response: 50Hz-20kHz
• Impedance: 4 Ohms

UPC Code

---

This weather-resistant & high-performance Infinity Marine amplifier delivers impressive power from a compact chassis designed to withstand outdoor environments. This amp incorporates our latest amplifier technology that includes selectable all-, high-, or low-pass crossovers with variable electronic frequency adjustment for precision system tuning. Engineered for harsh marine conditions, with power and performance to meet the needs of any outdoor audio system, this is the perfect amplifier to boost your vehicles sound system to the next level.

Features

Compact size Infinity Marine amplifiers feature a slim chassis and a small footprint to allow for installation in tight spaces

High- and low-level inputs

Speaker-level and low-level inputs let Infinity Marine amps integrate with just about any audio input.

Selectable Output and Variable Adjustment Crossovers

Infinity Marine amps feature selectable all-, high-, or low-pass crossovers with variable electronic frequency adjustment to allow for fine-tuning multiple system configurations.

Product Value

Infinity power and performance at an affordable price point

Cosmetic Appeal

Product family look and feel to meet the needs of our Infinity customers

Conformal-Coated PCB

Infinity Marine amplifiers are engineered to withstand harsh marine conditions, with fully “marinized” circuit boards to ensure flawless power delivery, year after year

Variable Crossovers

Onboard 12dB electronic crossovers, with selectable full-range, high-pass & low-pass switching, provide tuning options for systems of any size

Big Dynamic Power

Output power is perfectly matched to meet the needs for your Infinity marine products

General Features:

• Compact Size, Slim Chassis
• High/Low-Level Inputs
• Variable Adjustment Crossovers
• Conformal Coated PCB
• Fully Marinized Circuit Boards
• Max Power: 1800W Peak
• RMS Power Output @ 2Ω (subwoofer): 500W x 1, <1% THD+N
• RMS Power Output @ 4Ω (subwoofer): 320W x 1, <1% THD+N
• RMS Power Output @ 2Ω (full-range): 65W x 4, <1% THD+N
• RMS Power Output @ 4Ω (full-range): 45W x 4, <1% THD+N
• RMS Power Output @ 4Ω Bridged (full-range): 130W x 2, <1% THD+N
• Signal-to-Noise Ratio (sub): >80dB (ref 1W output @ 4Ω)
• Signal-to-Noise Ratio (full-range): >80dB (ref 1W output @ 4Ω)

UPC Code 050667372736

---

In a “one size fits all” world it is rare to see a company provide a wide range of options. The team at T-Spec understands how difficult it can be to find just the right product for your application. That is why the new T-Spec amp kit line features 28 different models to cover nearly every price, power and performance level imaginable! T-Spec amp kits utilize the finest materials to ensure maximum performance and hassle-free installation.

UPC Code 086429280995

---

This rugged Enrock EKMR1 marine soft wire universal antenna gives you performance, durability and plenty of placement options. The flexible wire makes it the perfect hideaway antenna, while the corrosion-resistant rubber exterior confirms that it will stand up to salt and spray. The 22inch long flexible wire will make mounting it a breeze.

General Features:

• 22" AM/FM Marine Antenna
• Improves Radio reception

UPC Code 799861388630

---

A ground-breaking virgin-PVC, Hyper-Flex insulation and multi-strand construction allows you to bend, twist, and contort the cable in any way imaginable for an ultimate installation experience while delivering maximum current flow; remains ultra-flexible under hot or cold temperature extremes; transfers the cleanest audio signal possible by using tightly twisted, silver-tinned OFC copper conductors; zip line to easily remove outer insulation.

Speaker Wire:

• 20 Feet
• 16 Gauge
• Silver-tinned OFC (oxygen-free copper)

UPC Code 632016086404