Rockford PMX-2 AM/FM Receiver, 4x 6.5" White Speakers, 400w Amplifier, Antenna
The PMX-2 features a 2.7"full color TFT display for optimum viewing - even in full sun - that is optically wet bonded to prevent any dust or moisture penetration. It is IPX6 rated and uses a water resistant rotary encoder knob with white LED button illumination and front mounted sub level controls. Additionally, with features such Pandora control capabilities and Bluetooth audio steaming with album art support for Apple and Android products, this unit becomes a true command center of any system.
The PMX-2 compact digital media receiver is designed for marine and motorsports applications.
- General Features:
- Power Output:
-Peak: 50 watts x 4 channels
-RMS: 25 watts x 4 channels - Plays MP3/WMA/WAV files.
- 2.7" full color display w/ auto dimming backlightning
- ISO8846/SAE J1171 Ignition Protection Certified
- Pandora Internet Radio
- A2DP and AVRCP Bluetooth Wireless Streaming
- FCC, CE, IC, and C-Tick Certified
- Multi Region Radio Frequencies
- Low Voltage Warning Alert
- AUX and USB Inputs with USB Charging
- On Board Punch EQ Control
- Independent Subwoofer Level Control
- iPod playback with on-screen display
- Selectable HP / LP / AP Crossovers with Selectable Slope 12 / 24 dB/Oct
- IPX6 Marine Grade
- 7-Band Graphic EQ
- Global AM/FM/Weather tuner
- Zone Control: 1 Zone / 1 Source (F/R or Sub)
UPC Code 780687344665
The RM0652B Prime 6.5" is a 2-way component system with a coaxially integrated tweeter featuring marine grade weather proofing technologies. Supplied in all black with matching grille.
If you're serious about building a better marine audio system, you need top-quality speakers. Rockford Fosgate's RM0652-B marine speakers are built to sound great on your boat, with True Marine Grade components and the performance you need to get the sound you want.
- True Marine Grade compliance
- 100% UV stable ASA injection molded plastic parts
- Injection molded mineral filled polypropylene cone body with UV inhibitors
- UV and Salt Fog Resistant Santoprene Surround
- Grill Integrated 0.5" LCP Dome Tweeter
- Ultra-flexible fully insulated silicone lead wire
- Proprietary corrossion resistant spring loaded push terminals
- Moisture, tear and fatigue resistant Aramid fiber spider
- Removable trim ring/grille
- Description: 2-Way
- Nominal Impedance: 4-Ohm
- Frequency Response: 52Hz - 20KHz
- Voice Coil Diameter: 1"
- Power Handling: 50W RMS / 100W Peak
- FS: 70Hz
- Qts: 1.08
- Vas: 0.38 cu. ft.
- Sensitivity (1W/1M): 88dB
- Sensitivity (2.83V/1M): 91dB
- Xmax: 0.16"
- Mounting Diameter: 5.4"
- Mounting Depth: 2.5"
- Also Available in White Color.
UPC Code 780687344931
The M400-4D is a 400 Watt 4-channel high efficiency Class-D marine amplifier designed to conform to UV and Salt-Fog protection standards. Amplifier features on-board Punch EQ, variable crossover and tri-state protection circuits. 12dB/octave Butterworth crossover 2/4 channel switch 4 Gauge power/ground connectors Cast aluminum heatsink Top mounted controls Conformal coated PCB and UV resistant finish for UV & Salt-Fog protection. On-board Punch EQ with +18dB boost @ 45Hz. Tri-stage protection covers thermal, over-current and short circuits.
These amp provide high-efficiency Class-D power for your marine audio system. They meet tough UV and Salt-Fog protection standards, so you can install them with confidence in your pleasure craft, whether you're blasting across inland waterways, or cruising out to your favorite salt-water fishing grounds.
- 4-channel marine Boat Yacht amplifier.
- 2/4 channel input switch.
- 75 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms)
- 200 watts RMS x 2 in bridged mode (4-ohm stable in bridged mode)
- Conformal-coated circuit board and UV-resistant finish.
- Variable high- and low-pass filters (50-500 Hz, 12 dB per octave)
- Variable bass boost (0-12 dB at 45 Hz)
- Three auto-turn on modes.
- Marine grade 2-part epoxy coated PCB.
- Tri-stage protection covers thermal, over-current and short circuits.
- On-board Punch EQ with +18dB boost @ 45Hz.
- CEA-2006 compliant.
- Preamp-level inputs and outputs.
- Wiring and hardware not included with amplifier.
- Dimensions: 9-1/8"W x 2"H x 6-7/8"D.
UPC Code 780687340803
Marine grade speaker wiring made simple, high quality marine duplex wiring with it's fine stranded tin plated copper to resist corrosion and the added benefit of an overall jacket for added protection. Don't settle for untinned speaker wire where the copper will turn black! Get long lasting performance from a quality made boat cable designed to last.
100% Oxygen Free Marine Grade, Tinned Cooper, Fine Strand Speaker Wire, White Flexible PVC Jacket Makes it ideal for any Marine Speaker System Installation.
General Features:
- 50 foot section of 14 gauge Blue Wire.
- Marine White Copper Tinned.
- The plastic jacket around the speaker wire helps to deliver high-quality undisturbed signals to and from all of your audio equipment.
- Connects audio speakers to your A/V receiver or amplifier.
UPC Code 728120452881
The Enrock 20B AM/FM Antenna includes a flexible mast for durability, along with a 180 swivel base for increased mounting options. It is corrosion resistant and includes 45 inch cable. Flexible mast. Angled mounting options allow you to install the 20B antenna in the most convenient locations. Corrosion resistant for the marine environment.
General Features:
- Marine AM/FM antenna
- Flexible Mast AM/FM Marine Antenna
- 180 degrees Swivel base for maximum mobility and 45 inch cable
- Designed for marine use only
- Angled mounting options allow installation of the antenna in the most convenient locations
- Corrosion resistant for the marine environment
UPC Code 799861390343
 |