2x JBL Stage3 968MF 6x9" 640W Max 3-Way Speakers w/Adapters, 2x 6.5" 560W Max 2-Way Coaxial Speakers, 4-Channel Compact Amplifier w/Front Wiring Harness + Install Kit, Antenna Booster, Speaker Wire

---

Installing aftermarket amplifiers in the front fairings of your Harley-Davidson motorcycle? This single or dual-amp installation kit will make wiring your connections so much easier! Constructed with oxygen-free copper for the best possible conductivity and audio performance.

Features:

• Single or dual-amp installation harness
• Designed for installing aftermarket amplifiers in front fairings
• Oxygen-free copper wiring for better conductivity and performance
• Quick-disconnect for each amplifier
• 3-year limited warranty

• 8 gauge 5.5' power and ground wires
• Over-mold split to (2) 10 gauge power and ground wires
• 60 amp mini ANL fuse and holder

• Ignition T-harness included for amp turn-on

UPC Code 086429416110

---

This JVC KS-DR1004D marine 4-Channel amplifier has a maximum power output of 400 watts and flaunts Class D amplification technology, providing you with a powerful interface for your vehicle's audio system. A conformal coating is a protective chemical coating to safeguard electronic circuits from harsh environments that may contain moisture or chemical contaminants. It provides a barrier to airborne contaminants from the operating environment, such as salt-spray, thus preventing corrosion. Separated circuit boards of the Pre-amp and Power-amp sections contribute to a reduction in radiation noise.

General Features:

• 4-Channel Marine Amplifier
• Conformal Coated Circuitry
• Circuit Separation Construction
• Large LPF Coil
• Variable High/Low-Pass Filter
• 400W Maximum Power Output
• RMS Power Output (4 ohm) [ 1% THD 14.4V]: 45W x 4 (20 - 20,000Hz)
• RMS Power Output (2 ohm) [ 1% THD 14.4V]: 45W x 4 (1,000Hz)
• RMS Power Output (Bridged 4 ohm) [ 1% THD 14.4V]: 90W x 2 (1,000Hz)
• Class D
• Signal-to-Noise Ratio (reference: 1W into 4 ohms): >82dB
• CEA-2006 Compliant
• Load Impedance Allowance: 2 - 8 Ohms
• HPF: 50Hz - 200Hz (-12dB/oct)
• LPF: 50Hz - 200Hz (-12dB/oct)
• RCA Input: Ach L/R, Bch L/R
• High Level Input (Speaker Level Input): Yes
• High Level Input Auto Power Control (Signal Sensing Turn On): Yes
• Input Sensitivity: .2 - 5V
• Dimensions (W x H x D): 5-11/16" x 1-3/4" x 3-7/8"

UPC Code 046838079245

---

The JBL Stage3 68F 6-1/2" (165mm) coaxial speaker embodies JBL’s legendary sound, delivering powerful audio in the car. The woofer cone is manufactured using a laser-etched tool, features the patented Plus One™ design for increased surface area, and is reinforced with 10% glass fiber to play deeper, more resonant bass. Additionally, the PEI balanced dome tweeter ensures improved sound distribution, resulting in crystal-clear highs and creating an immersive listening experience that elevates your car audio setup. The speaker’s true 4-ohm load design maximizes power output from your head unit or amplifier, compensating for system resistance to ensure optimal performance. Additionally, the speakers incorporate post-consumer recycled plastic components, PVC-free wiring, and packaging printed with soy-based inks, thereby minimizing environmental impact. Finally, precise fitment is critical to the success of this speaker family—ensuring seamless integration and consistent acoustic performance across vehicle platforms.

Features:

• 6.5" Coaxial Car Speaker without Grille
• Power Handling: 70W RMS, 560W peak
• Sensitivity: 91dB
• Frequency Response: 55Hz – 20kHz
• Impedance: 4 Ohms

UPC Code 050036417259

---

The JBL Stage3 968MF 6"x9" (152x230mm) three-way speaker embodies JBL’s legendary sound, delivering powerful audio in the car. The woofer cone is manufactured using a laser-etched tool, features the patented Plus One™ design for increased surface area, and is reinforced with 10% glass fiber to play deeper, more resonant bass. Additionally, the PEI balanced dome tweeter ensures improved sound distribution, resulting in crystal-clear highs and creating an immersive listening experience that elevates your car audio setup. The speaker’s true 4-ohm load design maximizes power output from your head unit or amplifier, compensating for system resistance to ensure optimal performance. Additionally, the speakers incorporate post-consumer recycled plastic components, PVC-free wiring, and packaging printed with soy-based inks, thereby minimizing environmental impact. Finally, precise fitment is critical to the success of this speaker family—ensuring seamless integration and consistent acoustic performance across vehicle platforms.

Features:

• 6x9" 3-Way Car Speaker without Grille
• Power Handling: 80W RMS, 640W peak
• Sensitivity: 92dB
• Frequency Response: 40Hz – 20kHz
• Impedance: 4 Ohms

UPC Code 050036417303

---

Metra Saddlebag Replacement Lids are designed with 6”x9” speaker adapters under the lid for correct 6”x9” fitment, and provide a better fit than any others on the market. They have metal mesh speaker grilles and are finished in gloss black and can go from package to bike. They can also be painted.

Features:

• One pair of bag lids with 6"x9" speaker adapters
• Metal mesh speaker grilles
• Factory latch assembly transfers to the new bag lid
• Additional hardware, rubber gaskets, and cloth tether restraints included
• Fits models with Saddlebags

UPC Code 086429358144

---

The Power Sport Motorcycle Universal Amplifier Wiring Kit includes the following 6 foot length of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder, 60 amp fuse protected by a black nylon braid, Pre-terminated ring terminals, (2) 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh and 4"x6" hook and loop mounting pad for micro-amplifiers.

Amplifier Wiring Kit:

• Designed tor motorcycles
• 6 feet of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder and 60 amp fuse protected by a black nylon braid
• Pre-terminated ring terminals make connections to the battery simple
• Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh makes upgrading the factory speaker wires or adding new speakers a smart choice
• Upgrading Harmon Kardon System – Two 47-ohm .5 watt resistors to keep the factory radio outputs active
• All the necessary installation hardware is included along wtth a 4 × 6 inch hook and loop mounting pad for micro-amplifiers to hold the amplifier securely in place

UPC Code 086429332267

---

Enrocks EORA102 is a universal AM/FM antenna that is easy to hide in your motorcycle, automobile, truck, and even boat! Just hide it anywhere. Simply hook up, peel, and stick. Will stick on to glass, roof, headliner, inside the camper, mounts to any surface.

General Features: 

• Electronic Stereo Radio Hidden Amplified Antenna Kit
• Hidden Amplified Antenna Design for Direct Replacement
• Covering all AM / FM Broadcast Radio
• Input: Thoroughfare / Output Impedance: 750HM
• Dimension: 3.75" X 1" X 0.75"

Installation Instructions

• Connect Antenna Plug of this unit to Car Radio Antenna Socket
• Connect Black 12v positive to accessories
• Secure Antenna to clean flat surface
• Connect Silver wire to good ground
• If extra gain/pickup is required, connect the red wire to positive side of rear window demister. (this connection is optional)​​

UPC Code 728120484479

---

A ground-breaking virgin-PVC, Hyper-Flex insulation and multi-strand construction allows you to bend, twist, and contort the cable in any way imaginable for an ultimate installation experience while delivering maximum current flow; remains ultra-flexible under hot or cold temperature extremes; transfers the cleanest audio signal possible by using tightly twisted, silver-tinned OFC copper conductors; zip line to easily remove outer insulation.

Speaker Wire:

• 20 Feet
• 16 Gauge
• Silver-tinned OFC (oxygen-free copper)

UPC Code 632016086404