2x JBL Stage3 968MF 6x9" 640W Max 3-Way Speakers w/Adapters, 2x 6.5" 560W Max 2-Way Coaxial Speakers, 4-Channel 450W Amplifier w/Front Wiring Harness + Install Kit, Power Block, Antenna Booster, Wire

---

Installing aftermarket amplifiers in the front fairings of your Harley-Davidson motorcycle? This single or dual-amp installation kit will make wiring your connections so much easier! Constructed with oxygen-free copper for the best possible conductivity and audio performance.

Features:

• Single or dual-amp installation harness
• Designed for installing aftermarket amplifiers in front fairings
• Oxygen-free copper wiring for better conductivity and performance
• Quick-disconnect for each amplifier
• 3-year limited warranty

• 8 gauge 5.5' power and ground wires
• Over-mold split to (2) 10 gauge power and ground wires
• 60 amp mini ANL fuse and holder

• Ignition T-harness included for amp turn-on

UPC Code 086429416110

---

The JBL Apex PA454 weather-resistant 4-channel multi-application Class D amplifier features an ultra-compact aluminum chassis and small footprint design to allow for versatile installation. The Apex Series PA454 powersports amplifier delivers efficient Class D power and is designed to fit into tight spaces and withstand outdoor environments without missing a beat. Available with 4-channels of output power, the Apex Series PA454 includes selectable front/rear electronic crossover frequency adjustment for quick and easy installation.

General Features:

• Ultra-Compact Aluminum Chassis
• Conformal Coated PCB
• Big Dynamic Power
• Full-Range Outputs and Selectable Crossovers
• High and low level Inputs
• Max Power: 450W peak
• RMS Power Output @ 4O: 45W x 4, <1% THD+N
• Selectable hi-pass filter: off, 60-, 80-, 120Hz @ 12dB/octave
• Frequency Response: 20Hz – 20kHz
• Signal-to-Noise Ratio: >75dB (ref 1W output @ 4O)
• Fuse rating: 15A

UPC Code 050036359092

---

The JBL Stage3 68F 6-1/2" (165mm) coaxial speaker embodies JBL’s legendary sound, delivering powerful audio in the car. The woofer cone is manufactured using a laser-etched tool, features the patented Plus One™ design for increased surface area, and is reinforced with 10% glass fiber to play deeper, more resonant bass. Additionally, the PEI balanced dome tweeter ensures improved sound distribution, resulting in crystal-clear highs and creating an immersive listening experience that elevates your car audio setup. The speaker’s true 4-ohm load design maximizes power output from your head unit or amplifier, compensating for system resistance to ensure optimal performance. Additionally, the speakers incorporate post-consumer recycled plastic components, PVC-free wiring, and packaging printed with soy-based inks, thereby minimizing environmental impact. Finally, precise fitment is critical to the success of this speaker family—ensuring seamless integration and consistent acoustic performance across vehicle platforms.

Features:

• 6.5" Coaxial Car Speaker without Grille
• Power Handling: 70W RMS, 560W peak
• Sensitivity: 91dB
• Frequency Response: 55Hz – 20kHz
• Impedance: 4 Ohms

UPC Code 050036417259

---

The JBL Stage3 968MF 6"x9" (152x230mm) three-way speaker embodies JBL’s legendary sound, delivering powerful audio in the car. The woofer cone is manufactured using a laser-etched tool, features the patented Plus One™ design for increased surface area, and is reinforced with 10% glass fiber to play deeper, more resonant bass. Additionally, the PEI balanced dome tweeter ensures improved sound distribution, resulting in crystal-clear highs and creating an immersive listening experience that elevates your car audio setup. The speaker’s true 4-ohm load design maximizes power output from your head unit or amplifier, compensating for system resistance to ensure optimal performance. Additionally, the speakers incorporate post-consumer recycled plastic components, PVC-free wiring, and packaging printed with soy-based inks, thereby minimizing environmental impact. Finally, precise fitment is critical to the success of this speaker family—ensuring seamless integration and consistent acoustic performance across vehicle platforms.

Features:

• 6x9" 3-Way Car Speaker without Grille
• Power Handling: 80W RMS, 640W peak
• Sensitivity: 92dB
• Frequency Response: 40Hz – 20kHz
• Impedance: 4 Ohms

UPC Code 050036417303

---

Metra Saddlebag Replacement Lids are designed with 6”x9” speaker adapters under the lid for correct 6”x9” fitment, and provide a better fit than any others on the market. They have metal mesh speaker grilles and are finished in gloss black and can go from package to bike. They can also be painted.

Features:

• One pair of bag lids with 6"x9" speaker adapters
• Metal mesh speaker grilles
• Factory latch assembly transfers to the new bag lid
• Additional hardware, rubber gaskets, and cloth tether restraints included
• Fits models with Saddlebags

UPC Code 086429358144

---

Power your marine amplifier with a wiring kit that can withstand the harsh environment and still deliver full sound performance. Fully tinned wiring ensures that these amp kits won’t corrode or oxidize and turn green after a season on the water. Oxygen-free copper provides a reliable connection with maximum conductivity. By using 100% virgin copper the tin won’t flake off, something commonly seen when using recycled copper materials. While it is also common to tin just the tips of the wire for cost savings, this practice does not actually provide any benefits. Metra’s amp kits use fully tinned copper wire from top to bottom that can withstand a harsh marine environment and salty air. The ignition-protected 50-amp circuit breaker is IP67 rated with stainless steel connection points for corrosion resistance

Amplifier Wiring Kit:

• Marine compliant amplifier wiring kit
• Fully tinned 100% virgin copper wire
• BC5W2 marine compliant jacket
• 50-amp marine circuit breaker is rated IP67 with stainless steel connection points for corrosion resistance
• Easy to solder tinned wiring
• Connectors, ring terminals, and wire ties included

What’s in the box:

• (1) 8-gauge tinned oxygen-free copper side-by-side red power and yellow ground wire (10ft.)
• (1) 18-gauge tinned oxygen-free copper blue remote turn-on wire (18ft.)
• (2) 8-gauge ring terminal with shrink tube and logo, pre-terminated on each end of the 2ft. red wire
• (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on 8ft. red wire
• (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on yellow wire
• (1) Ignition protected circuit breaker (50-amp)

UPC Code 086429416820

---

This durable, quick disconnect allows for convenient, safe installation and servicing of amps, active subwoofers, or removable winches in powersport and marine applications. This product is designed for use in the harshest environments, unlike standard audio equipment that is not suited for off-road applications. This important part of your installation can resist the elements to keep the system working great throughout all of your rugged outdoor adventures.

Power Block:

• 2.5” W x 2” L x 2.25” D
• Accepts 4 AWG power and ground
• Remote turn-on lead
• Machined brass block
• Has rubber boot to protect from the elements

UPC Code 086429430413

---

Enrocks EORA102 is a universal AM/FM antenna that is easy to hide in your motorcycle, automobile, truck, and even boat! Just hide it anywhere. Simply hook up, peel, and stick. Will stick on to glass, roof, headliner, inside the camper, mounts to any surface.

General Features: 

• Electronic Stereo Radio Hidden Amplified Antenna Kit
• Hidden Amplified Antenna Design for Direct Replacement
• Covering all AM / FM Broadcast Radio
• Input: Thoroughfare / Output Impedance: 750HM
• Dimension: 3.75" X 1" X 0.75"

Installation Instructions

• Connect Antenna Plug of this unit to Car Radio Antenna Socket
• Connect Black 12v positive to accessories
• Secure Antenna to clean flat surface
• Connect Silver wire to good ground
• If extra gain/pickup is required, connect the red wire to positive side of rear window demister. (this connection is optional)​​

UPC Code 728120484479

---

A ground-breaking virgin-PVC, Hyper-Flex insulation and multi-strand construction allows you to bend, twist, and contort the cable in any way imaginable for an ultimate installation experience while delivering maximum current flow; remains ultra-flexible under hot or cold temperature extremes; transfers the cleanest audio signal possible by using tightly twisted, silver-tinned OFC copper conductors; zip line to easily remove outer insulation.

Speaker Wire:

• 20 Feet
• 16 Gauge
• Silver-tinned OFC (oxygen-free copper)

UPC Code 632016086404